We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 A-plug to 5-pin miniature connector cable, 200 cm

Aquacomputer

Aquacomputer USB 2.0 A-plug to 5 Pin Miniature Connector VISION 200 cm internal power cable

SKU CH-T7JH-J275P

Connects an Aqua Computer USB device with a miniature header to a motherboard A-receptacle using a 200 cm cable

  • ColorBlack
  • FeaturesThis cable can be used to connect an Aqua Computer USB devic
  • Connects Aqua Computer VISION devices to motherboard USB headers
  • 5-pin miniature connector fits VISION USB header exactly
  • Standard USB 2.0 Type-A plug for broad compatibility
  • 200 cm length gives flexible internal routing
  • Supplied as single cable ready for installation

Aquacomputer USB 2.0 Internal Cable

This Aquacomputer cable connects a USB device with a miniature header to a standard USB 2.0 A-receptacle inside the computer. It measures 200 cm in length and comes in black. The part is designed specifically for Aqua Computer hardware such as the VISION module. It provides a direct internal link for USB control and monitoring.

Replaces Shorter or Mismatched Headers

Builders who need to route a miniature USB device to a motherboard A-port use this cable to bridge the connection. The 200 cm length supports routing behind motherboard trays or through large chassis without tension. The jump is worth it when the stock cable is too short or uses the wrong connector type. It removes the need for improvised adapters or external dongles.

Limited to USB 2.0 Speed and Miniature Pinout

The cable carries only USB 2.0 signals through its 5-pin miniature connector and A-plug. Bandwidth is capped at the USB 2.0 specification rate. It cannot support USB 3.0 or higher throughput devices. The fixed pinout fits Aqua Computer miniature headers only and will not mate with standard internal USB headers.

Highlights

  • Connects Aqua Computer VISION devices to motherboard USB headers
  • 5-pin miniature connector fits VISION USB header exactly
  • Standard USB 2.0 Type-A plug for broad compatibility
  • 200 cm length gives flexible internal routing
  • Supplied as single cable ready for installation

Specifications

BrandAquacomputer
Model1013533
ColorBlack
FeaturesThis cable can be used to connect an Aqua Computer USB device with a miniature USB header

Questions about this item

What internal header does the 5-pin miniature connector on this cable plug into?

The 5-pin miniature connector fits the USB header on Aquacomputer devices such as the VISION controller.

Which end of the 200 cm cable connects to the motherboard or hub, and which orientation does the A-plug require?

The USB 2.0 A-plug inserts into a standard Type-A receptacle on the motherboard or internal hub; the keyed 5-pin end attaches to the device header.

If the 5-pin miniature connector wears out, can it be replaced separately?

The connector is moulded onto the 200 cm cable, so the entire cable assembly must be replaced if the header end fails.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.