We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular splitter board with nine black connectors and one white input connector

Aquacomputer

Aquacomputer SPLITTY9 Splitter (9 Fans / Aquabus)

SKU CH-WMS3-7Q1PJ

A universal nine-way splitter connects up to nine 3-pin or 4-pin PWM fans or Aquabus devices with a 70 cm cable and 5 A maximum current

  • Block CompatibilityFalse
  • Pump Bearing5.6
  • Pump CapacityLK Aquacomputer SPLITTY9 Splitter für bis zu 9 Lüfter oder a
  • Pump NoiseLüfterkabel und Adapter
  • Radiator Material8,89
  • ColorBlack
  • Universal nine-way splitter supports 3-pin fans, 4-pin PWM fans or aquabus devices
  • Single input feeds power and PWM signal to all nine outputs
  • RPM signal from designated connector relayed back to motherboard header
  • Jumper selects aquabus mode forwarding all four signal lines to every port
  • Self-adhesive hook-and-loop strip plus four mounting holes for flexible installation

Universal Ninefold Splitter

The Aquacomputer SPLITTY9 is a universal splitter that supports up to nine fans or Aquabus devices. It works with both 3-pin and 4-pin PWM fans as well as Aquabus peripherals. A white input connector receives power and signals from a single fan header or Aquabus port. The unit distributes these to nine black output connectors.

Who This Suits

Builders running many fans from one motherboard header will appreciate the simplified cabling. Users expanding an Aquabus chain can connect multiple devices through one port. The 5 A current limit means systems drawing more power per header should look elsewhere. Installers needing a powered hub with independent speed curves cannot achieve that here.

Deciding Specification

Maximum current is rated at 5 A across all nine outputs. This figure determines how many high-performance fans can run simultaneously. Exceeding it risks instability or damage. Check each fan’s rated current before populating all ports.

Highlights

  • Universal nine-way splitter supports 3-pin fans, 4-pin PWM fans or aquabus devices
  • Single input feeds power and PWM signal to all nine outputs
  • RPM signal from designated connector relayed back to motherboard header
  • Jumper selects aquabus mode forwarding all four signal lines to every port
  • Self-adhesive hook-and-loop strip plus four mounting holes for flexible installation

Specifications

BrandAquacomputer
Model53231
Part Number1012925
Block CompatibilityFalse
Pump Bearing5.6
Pump CapacityLK Aquacomputer SPLITTY9 Splitter für bis zu 9 Lüfter oder aquabus-Geräte
Pump NoiseLüfterkabel und Adapter
Radiator Material8,89
ColorBlack
Reservoir CapacityFalse
FeaturesAquacomputer SPLITTY9 Splitter for up to 9 Fans or Aquabus Devices

Questions about this item

How many fans or Aquabus devices can this splitter support?

The SPLITTY9 provides nine black connectors so you can attach up to nine 3-pin fans, 4-pin PWM fans or Aquabus devices from a single input.

What does the 5 A current limit mean for my fan setup?

The 5 A maximum is the total current shared across all nine outputs; ensure the combined draw of every connected fan or device stays below that figure.

How does the Aquabus jumper change the way the splitter works?

Moving the jumper to the Aquabus position forwards all four Aquabus signal lines to every black connector, letting you chain Aquabus devices instead of fans.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.