We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Aquacomputer

Aquacomputer Internal USB Connection Cable 100cm 70025

SKU CH-N83R-KPE5Q

Connects Aquacomputer devices to a USB 2.0 header with a 100 cm black cable

  • ColorBlack
  • FeaturesAquacomputer Internal USB Connection Cable, 100cm long.
  • Connect Aquacomputer controllers internally via 100 cm USB 2.0 cable
  • Reach distant headers with 100 cm length
  • Simple installation using standard USB 2.0 connector
  • Black cable keeps build aesthetics clean
  • Ready to use with included 100 cm extension cable

Internal USB cable for Aquaero controllers

This 100 cm black cable connects an Aquaero unit to a motherboard USB 2.0 header using the proprietary Aquacomputer pin-out. It carries both data and power for the controller and any attached sensors or expansion modules. The fixed length suits mid-tower and full-tower builds where the header sits near the bottom edge.

Suitable for Aquaero owners needing a direct

Builders who route the Aquaero through a front-panel USB port or an external hub will not use this cable. Systems without a spare internal USB 2.0 header cannot install it without adding a header splitter or PCIe USB card.

Single specification: 100 cm length

Measure the path from your Aquaero mounting point to the motherboard USB 2.0 header; if the distance exceeds one metre you will need a longer cable or a different routing plan.

Highlights

  • Connect Aquacomputer controllers internally via 100 cm USB 2.0 cable
  • Reach distant headers with 100 cm length
  • Simple installation using standard USB 2.0 connector
  • Black cable keeps build aesthetics clean
  • Ready to use with included 100 cm extension cable

Specifications

BrandAquacomputer
Model70025
ColorBlack
FeaturesAquacomputer Internal USB Connection Cable, 100cm long.

Questions about this item

How can I verify the 100cm USB 2.0 cable is functioning after installation?

Connect it to the Aquaero controller and confirm the device appears in the Aquasuite software without errors.

What does the package contain and is anything else required?

The box includes one 100cm black internal USB extension cable; no additional parts are needed for a standard USB 2.0 header connection.

Which model number should I select for a 100cm internal USB link?

Choose model 70025 (supplier code 53085) — it is the only 100cm version listed.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.