We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Apple 108794 4-pin Molex to 4x 15-pin SATA Power Cable 24" Net Jacket

SKU CH-3N9X-P91M2

Converts a 4-pin Molex plug into four 15-pin SATA power connectors with a net jacket

  • TypeExtension Cable
  • ColorBlack
  • Length< 1"
  • Cable Length32.8 ft.
  • Specifications108794, SATA, Net Jacket, 0.35 ounces, Monoprice Inc.
  • Sports Team1 Piece
  • Converts one Molex plug into four SATA power connectors
  • 24 inch cable with 6 inch spacing for easy daisy-chaining
  • Net jacket keeps wires tidy inside the case
  • Supplies 5 V and 12 V power from the Molex source
  • Verify drives do not need 3.3 V before using this adapter

Molex-to-SATA adapter for drive power

This 24-inch cable converts a single 4-pin Molex plug into four 15-pin SATA power connectors. It lets builders add SATA drives to older power supplies that lack native SATA leads. The adapter suits desktops and servers where Molex ports remain available. It does not supply 3.3 VDC, so drives needing that rail cannot use it.

Steady delivery across four daisy-chained drives

Each SATA connector sits roughly 6 inches apart, allowing four devices to share one Molex feed. The copper conductors carry 5 V and 12 V continuously without a separate 3.3 V line. Load stays stable as long as the source Molex circuit and the drives’ combined draw remain within that rail’s rating. No active regulation or voltage conversion occurs on the cable itself.

Net-jacketed loom for tidy internal routing

Wires are bundled inside a black net jacket that resists snagging and keeps the loom flat against case walls. Connectors are moulded male-to-female with a 4-pin PWM-style Molex plug on one end and four keyed SATA receptacles on the other. The jacket adds no stiff radius, so the cable threads through tight grommets and behind drive cages without kinking.

Highlights

  • Converts one Molex plug into four SATA power connectors
  • 24 inch cable with 6 inch spacing for easy daisy-chaining
  • Net jacket keeps wires tidy inside the case
  • Supplies 5 V and 12 V power from the Molex source
  • Verify drives do not need 3.3 V before using this adapter

Specifications

BrandApple
Model108794
TypeExtension Cable
ColorBlack
Length< 1"
Cable Length32.8 ft.
Specifications108794, SATA, Net Jacket, 0.35 ounces, Monoprice Inc.
Sports Team1 Piece
Connector A1x 4-pin PWM
Connector B1x 12VHPWR PCIe Gen5 female
Connector Detail1 x eSATA to 1 x eSATA
Terminal GenderMale to Female
ConductorCopper Conductor
Refresh Rate2 feet
FeaturesSATA, Net Jacket, Monoprice, 108794

Questions about this item

Will the 4-pin Molex to four 15-pin SATA power cable add noticeable heat or noise when running continuously?

The adapter is a passive copper conductor with a net jacket and no active components, so it produces no noise and negligible heat during all-day operation.

What must my power supply already have for this Apple 108794 adapter to work?

Your power supply needs at least one free 4-pin Molex connector to plug the adapter into.

Can I use this 24" Molex-to-SATA adapter with older drives that still need 3.3 VDC?

The adapter only passes 5 VDC and 12 VDC from the Molex source, so drives requiring 3.3 VDC will not receive it and may not function.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.