We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze gate valve with wheel handle and press connection

Apollo

Apollo 30LF00801PR 2 in Gate Valve Trap

SKU CH-111K-WBGP6 MPN 30LF00801PR

Low-lead bronze gate valve for water lines handles 200 psi with a 338 Cv flow coefficient and EPDM seals

  • TypeDrain Components
  • Rated for 200 psi water and steam service
  • Low-lead bronze body meets Proposition 65 compliance
  • Rising stem with bronze wedge ensures reliable shut-off
  • Press connection on female end speeds installation
  • High 338 Cv coefficient delivers strong flow capacity

Apollo 2-Inch Gate Valve

The Apollo 30LF00801PR is a 2-inch gate valve built from low-lead bronze for water supply lines. Its press connection on the inlet side and rising stem with a wheel handle suit residential and light-commercial plumbing installations that require full-bore shut-off.

Press Connection and Rising Stem

The press end installs with standard press tools, eliminating the need for threading or soldering on that side. A rising stem shows valve position at a glance, while the screw-in bonnet allows internal access if service is ever needed. Ensure the press tool and jaw match the 2-inch size to avoid leaks.

Verify Pressure and Media Compatibility

Confirm the system operating pressure does not exceed 200 psi for water or steam service. The EPDM seal and bronze wedge are rated for water; check chemical compatibility if the line carries additives or treatment fluids. California Proposition 65 warnings apply to this product.

Highlights

  • Rated for 200 psi water and steam service
  • Low-lead bronze body meets Proposition 65 compliance
  • Rising stem with bronze wedge ensures reliable shut-off
  • Press connection on female end speeds installation
  • High 338 Cv coefficient delivers strong flow capacity

Specifications

TypeDrain Components
BrandApollo
Model30LF00801PR

Questions about this item

How can I verify the 2 in gate valve is operating correctly after installation?

Check that the rising stem moves smoothly when turning the wheel handle and confirm no leaks appear at the press connection or bronze body joints under normal water pressure up to 200 psi.

What components are included with the 30LF00801PR and what must be purchased separately?

The valve body, bronze wedge, EPDM seal, screw-in bronze bonnet and wheel handle are supplied; press fittings, pipe and any required tools are not included.

Which pressure rating should I select for a water system using this 2 in bronze gate valve?

The valve is rated for 200 psi maximum operating pressure for water and 200 psi for steam, with a Cv of 338, making it suitable for standard commercial water lines.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.