We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black rack-tower UPS with front LCD screen

APC

APC Smart-UPS X 3000 2700W 3000VA Rack/Tower LCD UPS

SKU CH-KAW8-3HBGN MPN 3000

Line-interactive 120 V UPS delivering 2700 W sinewave output with 10 outlets, switched groups, LCD control, AVR, and preinstalled network management card

  • Sinewave output protects sensitive servers with 2700W pure power
  • Line-interactive AVR corrects brownouts across 70–153V input range
  • LCD interface simplifies local configuration and status monitoring
  • Preinstalled network card enables remote SNMP and HTTPS management
  • Two switched outlet groups allow targeted load shedding for critical gear

Sinewave UPS for servers and network gear

The APC Smart-UPS X 3000 delivers 2700 watt and 3000 VA of pure sinewave output to protect servers, routers and switches from power disturbances. Line-interactive topology with automatic voltage regulation keeps connected equipment running during sags and swells without draining the battery. A pre-installed network management card enables remote monitoring and control over Ethernet. The unit mounts in a rack or sits as a tower.

2700 watt capacity with ten outlets and switched

Ten NEMA 5-20R receptacles supply protected power, and two independently switched outlet groups allow sequenced shutdown or reboot of non-critical loads. The UPS accepts an input range of 70 to 153 volts and maintains output within ± 5 percent at 120 volts. Frequency tolerance covers 47 to 53 hertz and 57 to 63 hertz. When utility power fails, the internal battery provides runtime proportional to the connected load; at full 2700 watt the reserve is limited to a few minutes.

Replaces basic standby or undersized UPS units

Upgrading from a standby model eliminates the transfer delay that can crash sensitive server power supplies. The jump is worthwhile when equipment requires sinewave output, remote SNMP or SSH management, or the ability to shed loads via switched outlets. Buyers who need longer runtime at high load or three-phase input will find this unit does not meet those requirements.

Highlights

  • Sinewave output protects sensitive servers with 2700W pure power
  • Line-interactive AVR corrects brownouts across 70–153V input range
  • LCD interface simplifies local configuration and status monitoring
  • Preinstalled network card enables remote SNMP and HTTPS management
  • Two switched outlet groups allow targeted load shedding for critical gear

Specifications

No published specifications for this item yet.

Questions about this item

Will the 2700W output and 10 outlets with 2 switched groups support my existing 120V servers and switches without overloading?

Yes, the unit delivers 2700W at 120V across 10 outlets, with two switched outlet groups you can control separately for load shedding.

How can I verify the UPS is operating correctly once installed?

The LCD interface shows real-time status, and the preinstalled AP9631 network card lets you monitor via SNMP, HTTP, HTTPS or SSH over Ethernet.

Which cables and accessories ship with the UPS, and what must I source separately?

Included are an 8 ft power cable, a serial cable and a USB cable; rack-mount rails and any additional SmartSlot cards are not included.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.