We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

APC

APC Smart-UPS Li-Ion Short Depth 1000VA 120V SMTL1000RM2UC UPS

SKU CH-66M7-PX8PD

Lithium-ion line-interactive UPS delivers 1000 VA/800 W sine-wave power with 3-hour recharge in a short-depth 2U rack form

  • Li-Ion battery cuts recharge time to 3 hours
  • depth 2U rack design fits tight server racks
  • 1000 VA / 800 W line-interactive sine-wave output
  • SmartConnect cloud monitoring via USB and serial ports
  • Surge protection rated at 680 joules for connected gear

Smart-UPS Li-Ion 1000VA Overview

This APC Smart-UPS is a line-interactive uninterruptible power supply rated at 1000 VA and 800 W. It uses lithium-ion battery chemistry and fits a short-depth rack profile. The unit delivers a sine-wave output at 120 V AC and includes six NEMA 5-15R receptacles for protected equipment.

Suited for Network Gear, Not Higher Loads

The UPS targets servers, point-of-sale terminals, routers, switches and similar network devices needing pure sine-wave backup. Sites that require more than 800 W of continuous power or a different input voltage range should consider other solutions. Management is handled through USB and serial ports with configurable alarms for on-battery and low-battery states.

120 V Input with 82 V to 144 V Range

The single specification that decides fit is the input voltage window of 82 V to 144 V AC at 50 Hz to 60 Hz. If the facility cannot maintain supply within this band, the unit will not operate correctly. Typical recharge time is three hours and the maximum operating temperature is 104°F (40°C).

Highlights

  • Li-Ion battery cuts recharge time to 3 hours
  • depth 2U rack design fits tight server racks
  • 1000 VA / 800 W line-interactive sine-wave output
  • SmartConnect cloud monitoring via USB and serial ports
  • Surge protection rated at 680 joules for connected gear

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the UPS is protecting my server after installation?

The LCD shows load percentage, battery charge and input voltage; the USB HID port lets the OS report on-battery and low-battery alarms without extra software.

What comes in the box and what must I add for rack mounting?

The unit includes the 2U short-depth UPS, USB cable, serial cable and SmartConnect card; rack rails are not included and must be purchased separately.

Should I choose the 1000 VA model or a higher capacity for my 120 V network rack?

At 800 W rated output the 1000 VA unit suits loads up to 800 W; if your equipment may exceed that, select a larger VA model instead.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.