We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rack-mount switched PDU with 21 IEC outlets and 6 ft cord

APC

APC APDU10452SW Switched PDU 17.3 kW 208 V 21 Outlets

SKU CH-7CGF-7ENT2 MPN APDU10452SW

Switched rack PDU delivers 17.3 kW at 208 V across 21 IEC outlets with Ethernet remote management

  • TypeSwitched
  • Switched outlet control enables remote power cycling per device
  • 3 kW capacity supports high-density rack deployments
  • 21 mixed IEC outlets fit diverse equipment plugs
  • Ethernet management with SNMP and HTTPS allows secure monitoring
  • 6 ft input cord with IEC 60309 460P9 plug simplifies installation

Switched PDU for 17.3 kW Loads

The APC APDU10452SW is a rack-mountable switched power distribution unit rated at 17.3 kW and 17300 VA. It accepts three-phase AC input from 200 to 240 V and delivers 208 V output through 21 IEC 60320 outlets. Network management runs over Ethernet with SNMP, HTTP and HTTPS for remote outlet control and monitoring.

Rack Mount with 6 ft Cord and IEC 60309 Input

The unit mounts in a standard rack and ships with a 6 ft input cord terminated by an IEC 60309 460P9 connector. Installation requires a compatible three-phase source and enough rack depth for the 24.47 lb chassis. Common issues arise when the facility receptacle does not match the 460P9 pinout or when outlet types are not verified against attached equipment cords.

Sustained 17.3 kW Delivery with Remote Switching

Under continuous load the PDU distributes up to 17.3 kW across its 21 outlets while the switched architecture allows individual outlet cycling over the network. The Ethernet interface supports 10/100 and 10/100/1000 links for reliable telemetry during extended operation. It is not suited for single-phase environments or for racks that lack a 460P9 supply.

Highlights

  • Switched outlet control enables remote power cycling per device
  • 3 kW capacity supports high-density rack deployments
  • 21 mixed IEC outlets fit diverse equipment plugs
  • Ethernet management with SNMP and HTTPS allows secure monitoring
  • 6 ft input cord with IEC 60309 460P9 plug simplifies installation

Specifications

TypeSwitched
Shipping weight1.81 kg
Package size1826 × 76 × 56 mm

Questions about this item

How can I verify the PDU is operating correctly after installation?

Check the local display for input voltage near 208 V and confirm each of the 21 outlets shows expected load; then access the web interface via Ethernet 10/100/1000 to review SNMP or HTTPS status logs.

What ships with the unit and what must I source separately?

The PDU arrives with a 6 ft cord terminated by an IEC 60309 460P9 plug; you must supply rack mounting hardware and the 21 C13/C15 or C19/C21 cables that match your equipment.

Which outlet mix should I select for a 17.3 kW three-phase deployment?

All 21 outlets support both C13/C15 and C19/C21 pin-outs, so choose cables that fit your servers; the 17300 VA capacity and 200-240 V three-phase input remain the same regardless of cable choice.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.