APC
APC APDU10350SM Switched Metered PDU 17.3 kW 48 Outlets 3-Phase
A rack-mountable switched metered PDU delivering 17.3 kW across 48 combination C13/C15/C19/C21 outlets with remote power control, per-outlet metering, and 3-phase 400/415 V input via IEC 60309 530P6
- Switched outlets enable remote power cycling per port
- 48 combination outlets accept C13 C15 C19 C21 plugs
- Outlet and PDU metering shows real-time load per phase
- Alternating phase layout simplifies cable routing and load balance
- Live-swap network card replaces without powering down devices
What this PDU is and who it serves
The APC APDU10350SM is a rack-mountable switched metered power distribution unit built for three-phase 400/415 V environments. It delivers 17.3 kW across 48 combination outlets in a 2.2-inch wide form factor, making it suitable for dense server and networking racks that require remote outlet control and per-outlet power visibility. The IEC 60309 530P6 input and colour-coded, phase-labelled outlets simplify deployment and load balancing. Buyers needing single-phase input or fewer than 48 outlets should look elsewhere.
Thermals noise and power draw in normal use
The unit operates passively with no integrated fans, so it adds no audible noise to the rack. Power consumption is limited to the internal metering and network management electronics, which draw only a small fraction of the 17300 VA capacity. The alternating-phase outlet layout helps distribute current evenly across the three phases, reducing the risk of localised heating and supporting stable thermal performance under load.
Bundled accessories and software impact
A six-foot IEC 60309 cord is included for immediate connection to the upstream supply. Dual Ethernet ports enable PDU cascading and Power Sharing, allowing the Network Management Card to stay online during an AC power loss so monitoring, sensors and alarm traps continue without interruption. The Live Swap NMC can be replaced without powering down the PDU or attached equipment, eliminating downtime for firmware updates or card replacement.
Highlights
- Switched outlets enable remote power cycling per port
- 48 combination outlets accept C13 C15 C19 C21 plugs
- Outlet and PDU metering shows real-time load per phase
- Alternating phase layout simplifies cable routing and load balance
- Live-swap network card replaces without powering down devices
Specifications
No published specifications for this item yet.
Questions about this item
How do I mount the 2.2" wide 0U PDU with 48 combination outlets in a rack?
Install the unit vertically in a NetShelter rack using the included toolless mounting brackets; the step often missed is aligning each outlet group with its color-coded breaker and phase labels so that alternating-phase load balancing works from top to bottom.
Which field-replaceable part will need attention first, and can I swap it without downtime?
The Live Swap Network Management Card can be replaced while the PDU and all 48 outlets stay powered, so no connected equipment loses supply during the swap.
At what load does the 3-phase 17.3 kW input become the limiting factor during sustained operation?
The IEC 60309 530P6 inlet is rated for 17.3 kW (17300 VA) at 400/415 V three-phase; exceeding that aggregate draw trips the upstream breaker before any per-outlet limit is reached.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114223BTC
In stock
