We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tall black vertical PDU with 36 C13 and 6 C19 outlets, IEC 309 plug, 9.84 ft cord

APC

APC AP8853 Metered 0U PDU 230V 32A 36 C13 6 C19 9.84 ft

SKU CH-X9QR-NJR0B

Metered 0U rack PDU delivering 230V 32A through 36 C13 and 6 C19 outlets with a 9.84 ft IEC 309 32A input cord

  • TypeMetered
  • Rack Size0U
  • CertificationsIEC 60950, VDE
  • ROHSYes
  • Input Voltage200V, 208V, 230V
  • Input Frequency50/60 Hz
  • Delivers 230 V power to 36 C13 and 6 C19 outlets
  • Metered input tracks 32 A load for capacity planning
  • 0U vertical form factor preserves full rack height for equipment
  • 84 ft cord with IEC 309 32 A plug reaches distant power sources
  • Certified to IEC 60950 and VDE for safety compliance

32A Metered 0U PDU for Dense Racks

The APC AP8853 is a metered power distribution unit built for 230 V, 32 A supply and a 0U vertical form factor. It provides 36 C13 and 6 C19 outlets on a 9.84 ft cord with an IEC 309 32 A 2P+E input plug. IEC 60950 and VDE certifications plus RoHS compliance cover safety and environmental requirements.

Replaces Basic Strip PDUs When Load Visibility

Moving from an unmetered strip to this unit adds real-time aggregate current monitoring on a local display and remote access through web, SNMP and Telnet interfaces. The upgrade is worthwhile when operators need to track phase loading, set alert thresholds or perform firmware updates without visiting the rack.

Steady 32 A Operation Across Wide Environmental

Overload protection engages if the 32 A input limit is exceeded, while the unit continues to operate from -5 °C to 45 °C at up to 95 % humidity and 3000 m elevation. Remote management functions remain available during sustained loads, allowing continuous monitoring without physical intervention.

Highlights

  • Delivers 230 V power to 36 C13 and 6 C19 outlets
  • Metered input tracks 32 A load for capacity planning
  • 0U vertical form factor preserves full rack height for equipment
  • 84 ft cord with IEC 309 32 A plug reaches distant power sources
  • Certified to IEC 60950 and VDE for safety compliance

Specifications

BrandAPC
ModelAP8853
TypeMetered
Rack Size0U
CertificationsIEC 60950, VDE
ROHSYes
Input Voltage200V, 208V, 230V
Input Frequency50/60 Hz
Maximum Input Current32A
Input Connector(s)IEC 309 32A 2P+E
Cord Length9.84 ft.
Output Voltage230V
Output Connector(s)(36) IEC 320 C13
(6) IEC 320 C19
Overload ProtectionYes
Operating Environment-5 - 45 ºC
Operating Relative Humidity5 - 95%
Operating Elevation0 - 3000 m
Storage Temperature-25 - 65 ºC
Storage Relative Humidity5 - 95%
Storage Elevation0 - 15000 m
FeaturesRemote Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Local Current Monitoring Display:
The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid over
Dimensions70.51" x 2.20" x 1.73"
Weight15.28 lbs.

Questions about this item

What rack space does the 0U metered PDU need for vertical mounting?

The 0U form factor mounts vertically in the rack’s side channels, using zero horizontal rack units so the 36 C13 and 6 C19 outlets face the equipment bay.

Which input plug must the site provide for the IEC 309 32A 2P+E connector?

The 9.84 ft cord ends in a blue IEC 309 32A 2P+E plug; the facility must supply a matching 32A single-phase socket rated for 200–230V.

When should the internal overload protection be checked after a trip event?

After any overload trip, inspect the PDU and connected loads before resetting; the unit operates from -5 to 45 °C, so verify ambient temperature is within that range.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.