We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 10 ft locking power cord with C19 and C20 connectors

APC

APC AP8760 PDU Power Interconnect Cord 10 ft C19 to C20 16 A

SKU CH-GH84-YV26E MPN AP8760

A 10 ft power cord with locking C19 to C20 connectors rated at 16 A for APC AP8000 Series Rack PDUs

  • TypeAccessories
  • Cord Length10 ft
  • FeaturesConnector on First End: 1 x IEC 60320 C19 Connector on Secon
  • 10 ft length reaches rack PDUs without excess cable
  • Locking C19 to C20 connectors prevent accidental disconnection
  • 16 A rating supports high-density server loads
  • Compatible with APC AP8000 series rack PDUs
  • 0 m cord meets standard rack mounting distances

Power interconnect cord for rack PDUs

This 10 ft cord links APC AP8000 series rack PDUs using a C19 connector on one end and a C20 connector on the other. It is rated for 16 A and suits data-centre or server-room installations that need a reliable power link between compatible units. The 3.0 m length gives flexibility for rack-to-rack or in-rack routing.

Suited for APC AP8000 rack PDU deployments

Technicians extending or reconfiguring APC AP8000 series power distribution will find the correct locking connectors and current rating here. Builds that require a different connector type, a higher amperage rating, or a non-APC power architecture should look at other cabling options.

C19 to C20 connector pair at 16 A

The decisive specification is the combination of IEC 60320 C19 and C20 ends rated at 16 A, which determines whether this cord matches the inlet and outlet on your APC AP8000 series PDU. Verify your equipment uses this exact connector pairing before purchasing.

Highlights

  • 10 ft length reaches rack PDUs without excess cable
  • Locking C19 to C20 connectors prevent accidental disconnection
  • 16 A rating supports high-density server loads
  • Compatible with APC AP8000 series rack PDUs
  • 0 m cord meets standard rack mounting distances

Specifications

BrandAPC
ModelAP8760
TypeAccessories
Cord Length10 ft
FeaturesConnector on First End: 1 x IEC 60320 C19
Connector on Second End: 1 x IEC 60320 C20
Current Rating: 16 A
Compatibility: APC AP8000 Series Rack PDUs
Shipping weight0.51 kg
Package size230 × 230 × 45 mm

Questions about this item

How do I confirm the AP8760 cord is delivering power correctly after connecting it to my AP8000 series PDU?

Verify the IEC 60320 C19 and C20 connectors are fully seated, then check that the PDU reports normal load current up to 16 A on the attached equipment.

What connectors come on the AP8760 and do I need any additional adapters for an AP8000 rack PDU?

The cord has a C19 plug on one end and a C20 inlet on the other; no extra adapters are required for APC AP8000 series rack PDUs.

Which current rating should I choose for my AP8000 PDU — is the 16 A version the only option?

The AP8760 is rated at 16 A and is the model specified for AP8000 series rack PDUs; select this version to match the PDU's input requirement.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.