We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black round cord with locking C19 connector and NEMA 5-20P plug, 10 ft length

APC

APC AP8751 PDU Locking C19 to 5-20P 10 ft 120V 20A

SKU CH-JJYA-GZYAS MPN AP8751

A 10 ft locking C19 to NEMA 5-20P power cord rated 120V 20A for secure PDU connections

  • TypeAccessories
  • Maximum Input Current20A
  • Input Connector(s)NEMA 5-20P
  • Cord Length10 ft.
  • Output Voltage120V
  • Output Connector(s)(1) IEC 320 C19
  • Locking C19 output prevents accidental disconnection
  • NEMA 5-20P input fits 20 A branch circuits
  • 10 ft cord length allows flexible rack placement
  • 12 AWG conductors rated for 20 A continuous load
  • Operating range 32 °F to 221 °F suits data-centre environments

Purpose-built PDU cord

The APC AP8751 is a single locking power cord that connects a NEMA 5-20P plug to an IEC 320 C19 outlet at 120V and 20A. It is made for IT racks and PDU strips where accidental disconnection must be prevented. The 10 ft length gives routing flexibility in standard cabinets.

Replaces loose C19 leads

Swap this in when standard C19 cords vibrate free under load or during maintenance. The locking C19 latch secures the connection without tools, and the 12 AWG SJT jacket handles the full 20 A rating. The jump is worth it whenever uptime depends on a positive mechanical lock rather than friction alone.

Fits 20 A branch circuits

The NEMA 5-20P plug requires a matching 20 A receptacle and circuit breaker. The cord’s 0.45 in outside diameter routes through typical cable managers, and the rubber/plastic jacket is rated from 32 to 221 degrees F. It frees up a C19 inlet on the PDU while eliminating the risk of an unplanned power loss.

Highlights

  • Locking C19 output prevents accidental disconnection
  • NEMA 5-20P input fits 20 A branch circuits
  • 10 ft cord length allows flexible rack placement
  • 12 AWG conductors rated for 20 A continuous load
  • Operating range 32 °F to 221 °F suits data-centre environments

Specifications

BrandAPC
ModelAP8751
TypeAccessories
Maximum Input Current20A
Input Connector(s)NEMA 5-20P
Cord Length10 ft.
Output Voltage120V
Output Connector(s)(1) IEC 320 C19
Shipping weight0.75 kg
Package size178 × 127 × 76 mm

Questions about this item

Will the NEMA 5-20P plug fit a standard 20 A wall outlet in my rack?

Yes, the NEMA 5-20P plug matches a 20 A 120 V receptacle and the 10 ft cord reaches most rack PDUs.

How do I secure the locking C19 connector so it will not vibrate loose?

Insert the IEC 320 C19 fully until the latch clicks, then verify the locking tab is engaged on both sides.

When should I replace this cord based on its temperature rating?

Replace it if the jacket shows cracking after sustained exposure near 221 °F or if the rubber becomes brittle below 32 °F.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.