We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six black locking IEC C13 to C14 power cords coiled together

APC

APC AP8704S-NA PDU Power Cord Kit 6× Locking C13-C14 1.2m

SKU CH-1RVP-7PAK0 MPN AP8704S-NA

Six locking C13-to-C14 cords rated at 10 A and 1.2 m long for APC AP8000 series PDUs

  • TypeAccessories
  • CertificationsCSA, UL Listed
  • ROHSYes
  • Maximum Input Current10A
  • Input Connector(s)IEC-320 C14
  • Cord Length4'
  • Secure PDU connections with locking C13-C14 plugs
  • Six 1.2 m cords included for multi-device power
  • Rated 10 A for reliable rack PDU operation
  • CSA and UL listed for North American safety
  • RoHS compliant with REACH environmental certification

Locking C13 to C14 cord kit

This kit provides six locking IEC 60320 C13 to C14 power cords, each 1.2 metres long and rated for 10 amps. They are designed to secure connections to compatible APC rack PDUs and prevent accidental disconnection in dense IT environments.

Suited for managed rack installations

The cords suit administrators who need reliable, vibration-resistant power links for servers and network gear on APC AP8000 series PDUs. Buyers requiring different connector types, higher current ratings or non-locking leads should look at other options.

10 A locking C13-C14 specification

The decisive specification is the 10 A current rating combined with the locking C13-to-C14 interface, which determines whether the cords match the PDU outlets and the attached equipment power inlets.

Highlights

  • Secure PDU connections with locking C13-C14 plugs
  • Six 1.2 m cords included for multi-device power
  • Rated 10 A for reliable rack PDU operation
  • CSA and UL listed for North American safety
  • RoHS compliant with REACH environmental certification

Specifications

BrandAPC
ModelAP8704S-NA
TypeAccessories
CertificationsCSA, UL Listed
ROHSYes
Maximum Input Current10A
Input Connector(s)IEC-320 C14
Cord Length4'
Output Connector(s)(1) IEC 320 C13
Operating Environment0 - 105 °C
Operating Relative Humidity20 - 80%
Operating Elevation0 - 3000 m
Storage Temperature-25 - 105 °C
Storage Relative Humidity20 - 80%
Storage Elevation0 - 15000 m
Shipping weight1.81 kg
Package size353 × 131 × 94 mm

Questions about this item

Will the 10 A rating on these C13-to-C14 cords add noticeable heat or power draw when the PDU runs continuously?

Each cord is rated for 10 A at up to 105 °C operating temperature, so heat contribution is minimal within that limit.

What existing PDU inlet do I need so these six locking C13 plugs can connect?

They require a PDU with IEC-320 C14 inlets, such as the APC AP8000 series rack PDUs.

Can I use these 1.2 m locking cords on an older rack PDU that only has standard C13 outlets?

The cords have C14 plugs on the supply side, so the older PDU must provide C13 outlets to accept them.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.