We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

APC

APC AP6002A PDU Basic 200-240V 30A 14xC13 2xC19 10ft

SKU CH-J799-JBCPE MPN AP6002A

Basic 200-240 V PDU with 14 C13 and 2 C19 outlets, NEMA L6-30P input and 10 ft cord

  • TypeBasic
  • CertificationsUL / C-UL
  • ROHS2011/65/EU - latest revision
  • Input Voltage200 - 240 VAC +6% to -10%
  • Input Frequency50/60 Hz
  • Maximum Input Current30A
  • Delivers 200-240 VAC power with ±6%/-10% tolerance for stable equipment operation
  • Supplies up to 30A input current through NEMA L6-30P connector for high-density racks
  • Provides 14 C13 and 2 C19 outlets to power diverse servers and network gear
  • Includes 10 ft cord length for flexible rack placement and cable routing
  • Certified UL/C-UL and RoHS 2011/65/EU compliant for safety and environmental standards

Rack PDU with NEMA L6-30P input

The APC AP6002A is a basic power distribution unit rated for 200 to 240 VAC input at up to 30 A. It provides sixteen output sockets, fourteen C13 and two C19, fed by a 10 ft cord. The unit is certified to UL and C-UL standards and complies with the RoHS directive.

Suited for 200-240 V racks needing dense C13/C19

This PDU fits cabinets that run on 200 to 240 VAC and need a high count of C13 and C19 receptacles from a single 30 A branch circuit. It does not suit sites that require per-outlet metering, remote switching or environmental monitoring.

Input connector is NEMA L6-30P

The 10 ft supply cable terminates in an L6-30P plug, so the facility must provide a matching 30 A, 200 to 240 V receptacle. Without that specific outlet the unit cannot be connected.

Highlights

  • Delivers 200-240 VAC power with ±6%/-10% tolerance for stable equipment operation
  • Supplies up to 30A input current through NEMA L6-30P connector for high-density racks
  • Provides 14 C13 and 2 C19 outlets to power diverse servers and network gear
  • Includes 10 ft cord length for flexible rack placement and cable routing
  • Certified UL/C-UL and RoHS 2011/65/EU compliant for safety and environmental standards

Specifications

BrandSchneider Electric
ModelAP6002A
TypeBasic
CertificationsUL / C-UL
ROHS2011/65/EU - latest revision
Input Voltage200 - 240 VAC +6% to -10%
Input Frequency50/60 Hz
Maximum Input Current30A
Regulatory Derated Input Current24A
Input Connector(s)NEMA L6-30P
Cord Length10 ft
Output Voltage200 - 240 VAC +6% to -10%
Output Connector(s)14 x C13 and 2 x C19
Overload Protection20A
Operating Environment0 - 50 Celcius degree
Operating Relative Humidity5 - 95%
Operating Elevation0 - 10000 Feet
Storage Temperature-15 - 60 Celcius degree
Storage Relative Humidity5 - 95%
Storage Elevation0 - 50000 Feet
Dimensions1.85" x 2.19" x 32.81"
Weight8.49 lbs.
Shipping weight5.44 kg
Package size970 × 165 × 127 mm

Questions about this item

What input connector must my facility provide for the NEMA L6-30P plug on this PDU?

The PDU requires a matching NEMA L6-30R receptacle on a 200-240 VAC circuit rated for up to 30 A.

Will my existing C13 and C19 power cables plug directly into the 14 C13 and 2 C19 outlets?

Yes, the fourteen C13 and two C19 outlets accept standard C14 and C20 equipment plugs without adapters.

How can I confirm the PDU is delivering power to connected devices after installation?

Verify that equipment plugged into the C13 and C19 outlets powers on normally and that the total load stays within the 20 A overload protection limit.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.