We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 2U rack-mount PDU with 16 C13 and 2 C19 outlets, two L6-30P inputs, USB and Ethernet ports

APC

APC AP4432A PDU Switched 4992 VA 200/208 V 2U 16 C13 2 C19

SKU CH-4V62-W4F7Q MPN AP4432A

Switched rack PDU delivering 4992 VA at 200/208 V with 16 C13 and 2 C19 outlets in 2U

  • TypeSwitched
  • Switched PDU enables remote outlet control
  • Automatic transfer switch provides redundant power paths
  • 16 C13 and 2 C19 outlets support dense rack deployments
  • 4992 VA capacity at 200/208 V powers critical equipment
  • USB and Gigabit Ethernet allow network-based management

Switched PDU for 200/208 V Racks

The APC AP4432A is a switched power distribution unit that delivers 4992 VA across 16 C13 and 2 C19 outlets. It mounts in a 2U rack space and accepts two NEMA L6-30P input cords for dual-feed redundancy. Network-grade USB and Gigabit Ethernet ports enable remote outlet control and monitoring.

Automatic Transfer Switching

The built-in automatic transfer switch shifts load between the two input sources without interruption when one feed fails. This behaviour protects single-corded servers and network gear that cannot tolerate a power loss. No additional software licences are required to activate the switching function.

Rack Mounting and Connectivity

A mounting kit with brackets is included for standard 19-inch rack installation. The 8 ft input cords reach floor-mounted PDUs or overhead busways without extension leads. Black metal housing weighs 14.51 lbs and fits within the 2U profile, leaving adjacent rack space free for other equipment.

Highlights

  • Switched PDU enables remote outlet control
  • Automatic transfer switch provides redundant power paths
  • 16 C13 and 2 C19 outlets support dense rack deployments
  • 4992 VA capacity at 200/208 V powers critical equipment
  • USB and Gigabit Ethernet allow network-based management

Specifications

TypeSwitched
Shipping weight1.59 kg
Package size432 × 236 × 89 mm

Questions about this item

Will the NEMA L6-30P input cords need periodic replacement?

The 8 ft input cords are fixed and rated for continuous 30 A service; inspect them during routine rack maintenance but they have no scheduled replacement interval.

Which limit appears first when the 4992 VA load runs continuously?

The 30 A input rating on each NEMA L6-30P plug caps sustained draw at 4992 VA, so total connected equipment must stay at or below that figure.

How much heat and noise does the 2U chassis produce during all-day operation?

The unit has no internal fans; it adds only passive heat from the transfer relay and passes through the 200/208 V supply, so rack airflow handles thermal load silently.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.