AOSU
AOSU Fiber Optic HDMI 2.1 Cable 65FT 48Gbps 8K@60Hz 4K@120Hz
A 65 ft fibre-optic HDMI 2.1 cable delivers 48 Gbps bandwidth for 8K at 60 Hz and 4K at 120 Hz with Dynamic HDR, eARC and VRR
- 8K@60Hz and 4K@120Hz for ultra-sharp gaming and cinema
- 48 Gbps bandwidth carries Dynamic HDR, Dolby Vision and 32-channel audio
- eARC and VRR eliminate lip-sync delay and screen tearing
- 65 ft fiber-optic link reaches distant displays without signal loss
- HDMI 2.1 certified with HDCP 2.2/2.3 and backward compatible to 1.1
65 ft Fiber Optic HDMI 2.1 Cable
This 65 ft fiber optic HDMI 2.1 cable delivers 48 Gbps bandwidth for 8K at 60 Hz, 4K at 120 Hz, and 2K at 240 Hz. It supports Dynamic HDR, Dolby Vision, eARC, and VRR for gaming consoles, media players, and high-resolution displays. The unidirectional design requires correct source and display orientation. Backward compatibility covers HDMI 2.0, 1.4, 1.2, and 1.1 devices.
Bandwidth and Distance Limits
Fiber optic construction allows the full 48 Gbps signal to reach 65 ft without the degradation typical of copper cables at this length. The cable handles 8K 60 Hz, 4K 120 Hz, and 2K 240 Hz formats, plus 32-channel audio and 4:4:4 RGB colour. HDCP 2.2 and 2.3 content protection is supported. Copper alternatives at this distance often drop to lower speeds or require active signal boosters.
Unidirectional Installation Required
Each connector is marked SOURCE or DISPLAY and must be plugged into the correct device type. The SOURCE end connects to consoles, PCs, or media players; the DISPLAY end connects to TVs, monitors, or projectors. Reversing the ends will result in no signal. Installers must verify orientation before routing the cable through walls or conduit.
Highlights
- 8K@60Hz and 4K@120Hz for ultra-sharp gaming and cinema
- 48 Gbps bandwidth carries Dynamic HDR, Dolby Vision and 32-channel audio
- eARC and VRR eliminate lip-sync delay and screen tearing
- 65 ft fiber-optic link reaches distant displays without signal loss
- HDMI 2.1 certified with HDCP 2.2/2.3 and backward compatible to 1.1
Specifications
No published specifications for this item yet.
Questions about this item
Which length of this fiber-optic HDMI 2.1 cable should I choose for a 65 ft run?
The cable is supplied at 65 ft, a single fixed length designed for long-distance 8K and 4K signals without repeaters.
What does the 48 Gbps rating mean when the cable is connected to my display?
It delivers the full HDMI 2.1 bandwidth needed for 8K at 60 Hz, 4K at 120 Hz, Dynamic HDR, Dolby Vision, eARC and VRR without compression.
How does the HDMI 2.1 interface limit performance on this 65 ft fiber cable?
The HDMI 2.1 standard caps the link at 48 Gbps, so 8K 60 Hz, 4K 120 Hz and 2K 240 Hz are the maximum supported formats over this length.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



