Aomoproing
Aomoproing SATA to GPU 8 Pin Power Adapter Cable
Dual SATA 15pin to PCIe 8(6+2) pin adapter cable, 8 inches, 18AWG tinned copper conductors for 12V DC power
Pack 1 Pack
- 2 packs
- 1 Pack
- Powers 8-pin PCIe GPU from dual SATA 15pin connectors
- 18AWG tinned copper conductors carry 12V DC reliably
- 8-inch length fits most PC case layouts
- PCIe 8(6+2) pin female accepts 6-pin or 8-pin plugs
- UL1007 rated wire meets safety standard
Dual SATA to PCIe 8-pin adapter
This cable converts two SATA 15-pin power connectors into a single PCIe 8-pin (6+2) connector. It allows a graphics card requiring an 8-pin power input to draw power from a supply that only offers SATA leads. The assembly uses 18AWG tinned copper wire rated to UL1007 and measures eight inches in length.
For builders without native PCIe power
The adapter suits owners of older or entry-level power supplies that lack dedicated PCIe connectors but need to run a card with an 8-pin socket. It is not for systems where the PSU already provides native PCIe leads, nor for configurations that demand more current than two SATA sockets can safely deliver.
Capacity limited by SATA specification
Each SATA 15-pin connector is rated for 12V DC at a modest current, so the pair can handle typical mid-range cards within that envelope. High-end GPUs with dual 8-pin sockets or power draws exceeding the SATA spec will exceed the cable’s headroom and require a properly equipped power supply.
Highlights
- Powers 8-pin PCIe GPU from dual SATA 15pin connectors
- 18AWG tinned copper conductors carry 12V DC reliably
- 8-inch length fits most PC case layouts
- PCIe 8(6+2) pin female accepts 6-pin or 8-pin plugs
- UL1007 rated wire meets safety standard
Specifications
No published specifications for this item yet.
Other versions of this model
1 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
Do I need two free SATA power connectors from my PSU to use this adapter?
Yes, the adapter has dual SATA 15pin male connectors, so your power supply must provide two available SATA power leads.
Will this cable deliver enough power for a GPU that needs a 6-pin PCIe connector instead of 8-pin?
The PCIe end is an 8-pin (6+2) female, so the 6-pin portion can be used alone for cards requiring a 6-pin connection.
How can I verify the adapter is supplying 12 V DC to the graphics card after installation?
Measure the voltage on the PCIe 8-pin connector with a multimeter while the system is running; it should read 12 V DC.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
anicorn ADP-200JB D 200W 20V 10A 6.0 x 3.7mm AC Adapter Charger
- AC Adapter
Bitspower Q-Dragon Baby Doll Keyholder (Gray)
- Liquid Cooling Syst…




