We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Slim 66ft fiber DisplayPort cable with male connectors

Aomoproing

Aomoproing Fiber DisplayPort Cable 66ft DP 1.4 32.4Gbps 8K@60Hz 4K@144Hz

SKU CH-5D9G-RT5EC

A 66 ft fibre-optic DisplayPort 1.4 cable delivering 32.4 Gbps for 8K at 60 Hz or 4K at 144 Hz

Cable Length 66 ft.

  • Transmits 8K at 60 Hz over 66 ft via fiber optic DP 1.4
  • Delivers 4K at 144 Hz and 240 Hz with 32.4 Gbps bandwidth
  • Slim fiber construction enables in-wall routing and flexible installation
  • Male-to-male 20-pin connectors link PCs, laptops, monitors and projectors
  • Tinned copper plus fiber conductors maintain signal integrity at 8.1 Gbps per lane

Long-range fiber DisplayPort cable

This 66 ft fiber-optic DisplayPort 1.4 cable carries 32.4 Gbps over a single run, letting you place a monitor or projector far from the PC without signal loss. It targets installers and enthusiasts who need an in-wall link between a desktop or laptop and a high-resolution display. The slim hybrid construction uses tinned copper plus optical fibers to keep the cable flexible enough for conduit pulls.

Male-to-male 20-pin connectors and hybrid conductors

Each end terminates in a standard 20-pin DisplayPort male plug that locks securely into graphics cards, monitors, projectors or HDTVs. The mixed tinned-copper and fiber conductor handles the 8.1 Gbit/s per lane required for HBR3 bandwidth while remaining thin enough for tight bends behind walls. No external power adapters are needed because the optical conversion is built into the connector heads.

Check port version and resolution needs before

Verify that both source and sink devices support DisplayPort 1.4 or later to reach the stated 32.4 Gbps ceiling. The cable is rated for 7680×3840 at 60 Hz, 3840×2160 at 144 Hz or 240 Hz, 3440×1440 at 60 Hz and 2550×1440 at 60 Hz; older ports or DSC-disabled hosts may fall back to lower modes. Ensure the 66 ft length matches your run so you avoid excess slack inside the wall cavity.

Highlights

  • Transmits 8K at 60 Hz over 66 ft via fiber optic DP 1.4
  • Delivers 4K at 144 Hz and 240 Hz with 32.4 Gbps bandwidth
  • Slim fiber construction enables in-wall routing and flexible installation
  • Male-to-male 20-pin connectors link PCs, laptops, monitors and projectors
  • Tinned copper plus fiber conductors maintain signal integrity at 8.1 Gbps per lane

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What bandwidth does the DisplayPort 1.4 interface cap at with this cable?

The cable supports up to 32.4 Gbps total bandwidth, which is the HBR3 rate of 8.1 Gbps per lane.

What physical clearance does the 66 ft fiber cable need for in-wall routing?

The cable uses a slim, flexible fiber construction with standard 20-pin male DisplayPort connectors at each end.

How do I install the directional fiber cable correctly?

Connect the end marked "Source" to the PC or laptop and the end marked "Display" to the monitor; reversing them will result in no signal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.