We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort cable with male connectors on both ends, 10 ft long

Aomoproing

Aomoproing DisplayPort cable 10 ft 8K 60Hz 4K 144Hz HBR3 DSC 1.2 HDR10

SKU CH-XQ5J-4YA9S

Delivers 8K at 60 Hz and 4K at 144 Hz over 10 ft with HBR3 bandwidth and DSC 1.2 compression

Cable Length 10 Feet

  • 8K at 60 Hz via HBR3 32.4 Gbps bandwidth
  • 4K at 144 Hz for high-refresh gaming with DSC 1.2
  • 10 ft pure-copper cable reaches distant monitors without signal loss
  • Latch connectors lock securely and release with one press
  • Plug-and-play with FreeSync and G-Sync compatible displays

10 ft DisplayPort 1.4 cable for 8K

This 10 ft DisplayPort 1.4 cable links a graphics card or laptop to a monitor, VR headset or HDTV. It handles 8K at 60 Hz and 4K at up to 144 Hz so gamers and creators get the resolution and refresh rate they need. The pure-copper conductors and HBR3 certification deliver 32.4 Gbps of bandwidth. Plug-and-play operation works with FreeSync and G-Sync displays.

HBR3 bandwidth with DSC 1.2 compression

The decisive specification is the 32.4 Gbps HBR3 link combined with DSC 1.2 display stream compression. That pairing lets the cable carry 8K 60 Hz or 4K 144 Hz signals without requiring a thicker or active cable. If your source and sink both support DisplayPort 1.4 with DSC, this single cable meets the throughput requirement. Without DSC 1.2 on both ends the highest resolutions will not be available.

Moulded latch connectors and 10 ft reach

Each end has a male DisplayPort plug with a moulded latch that locks securely and releases with a button press. The 10 ft (6.6 ft in metric) length gives routing flexibility for desktop towers, wall-mounted screens or VR setups. HDR10 pass-through and forward error correction are included, so the cable adds no extra software or adapters to the signal chain.

Highlights

  • 8K at 60 Hz via HBR3 32.4 Gbps bandwidth
  • 4K at 144 Hz for high-refresh gaming with DSC 1.2
  • 10 ft pure-copper cable reaches distant monitors without signal loss
  • Latch connectors lock securely and release with one press
  • Plug-and-play with FreeSync and G-Sync compatible displays

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will 32.4 Gbps bandwidth actually deliver 8K 60 Hz on my system?

The cable supports 32.4 Gbps HBR3 with DSC 1.2 compression, so it can carry 8K at 60 Hz when both the graphics card and monitor implement DisplayPort 1.4 and DSC decoding.

What does DisplayPort 1.4 with HBR3 and DSC 1.2 limit in real use?

The link tops out at 32.4 Gbps; DSC 1.2 compresses the stream so 8K 60 Hz and 4K 144 Hz fit, but uncompressed 8K or higher refresh rates would exceed the cap.

How much clearance do the latched DisplayPort plugs need behind the monitor?

Each male DisplayPort connector has a molded latch release button; allow a few centimetres behind the port so the button can be pressed for removal.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.