Aomoproing
Aomoproing DisplayPort 1.4 extension cable 6.6ft 8K@60Hz 4K@144Hz
Extends a DisplayPort 1.4 link by 6.6 ft with 32.4 Gbps bandwidth for 8K at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz
- Enjoy 8K clarity at 60 Hz with 32.4 Gbps bandwidth
- Smooth 4K gaming at 144 Hz refresh rate
- Competitive 1080p play at 240 Hz speed
- Reliable 6.6 ft reach for flexible desk setups
- Backward compatible with DP 1.2 and 1.0 devices
What this cable does
This DisplayPort 1.4 extension cable carries 8K video at 60 Hz, 4K at 144 Hz and 1080p at 240 Hz over a 32.4 Gbps link. It is HDCP 2.2 compliant and backwards compatible with DisplayPort 1.2 devices. The 6.6 ft length lets you bridge a gap between a GPU and a monitor without moving either device.
Who it suits and who it does not
Builders who need to extend an existing DisplayPort run by about two metres will find the bandwidth and length match. Buyers who want a longer reach or an active optical link for runs beyond this length should look at other solutions. The cable is passive copper, so it does not amplify the signal for extended distances.
The spec that decides fit
The 32.4 Gbps HBR3 bandwidth rating is the single figure that determines whether your target resolution and refresh rate are supported. If your display and source both require HBR3 for 8K at 60 Hz or 4K at 144 Hz, this extension will pass the signal; if either end needs more bandwidth, the cable will be the bottleneck.
Highlights
- Enjoy 8K clarity at 60 Hz with 32.4 Gbps bandwidth
- Smooth 4K gaming at 144 Hz refresh rate
- Competitive 1080p play at 240 Hz speed
- Reliable 6.6 ft reach for flexible desk setups
- Backward compatible with DP 1.2 and 1.0 devices
Specifications
No published specifications for this item yet.
Other versions of this model
5 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How do I install the Aomoproing DisplayPort 1.4 extension cable, and what step is often missed?
Connect the male end to your source and the female end to your display cable; the step often missed is ensuring both connectors are fully seated so the latches click, otherwise 8K@60Hz or 4K@144Hz signals may drop.
What maintenance or replacement will the Aomoproing DisplayPort 1.4 extension cable need later?
No scheduled maintenance is required; replace the cable only if the latches break, the jacket is damaged, or you need a length other than 6.6ft for a new setup.
What limit appears first on the Aomoproing DisplayPort 1.4 extension cable under sustained 8K@60Hz use?
The 32.4 Gbps HBR3 bandwidth ceiling is the first limit; sustained 8K@60Hz uses the full pipe, so any extra overhead such as deep colour or high refresh rates beyond 60Hz cannot be added.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.








