We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat white Cat6 Ethernet cable 65 ft with gold RJ45 connectors

Aomoproing

Aomoproing Cat 6 Flat Ethernet Cable 65 ft

SKU CH-D3C7-NFNGR

Flat Cat 6 cable runs 65 ft along walls or under carpet with gold-plated RJ45 connectors and 250 MHz bandwidth

  • Length65 ft.
  • High-speed 10-gigabit connectivity backed by Cat 6 250 MHz rating
  • Flat 5.8 mm profile runs cleanly along walls and under carpets
  • Gold-plated RJ45 contacts with 50 micron plating resist corrosion
  • Pure bare copper conductors avoid CCA performance loss
  • 65 ft length with snagless clips simplifies LAN setup

Flat 65 ft Cat6 patch cable

The Aomoproing flat Cat6 Ethernet cable runs 65 ft and uses 30 AWG stranded bare copper conductors with 50 micron gold-plated RJ45 connectors. It is built for universal LAN connectivity with PCs, servers, printers, routers, switches, consoles, PoE devices, NAS units and VoIP phones. The flat profile lets it follow walls, edges and corners or slide under carpet for a cleaner installation.

Sustained 250 MHz bandwidth

The cable is rated for up to 250 MHz and supports 10Base-T, 100BASE-TX, 1000Base-T and 10GBase-T signalling. Four twisted pairs with HDPE insulation and a PVC jacket keep crosstalk low during continuous gigabit or 10-gigabit traffic. Every unit passes Fluke testing, confirming the bare copper conductors meet the Cat6 performance spec over the full length.

Snagless clips and flat routing

Snagless RJ45 clips protect the locking tab when pulling the cable through tight spaces. The 5.8 mm flat cross-section simplifies routing along baseboards or under flooring without the bulk of round cable. No shielding is fitted, so environments with strong EMI may need a shielded alternative.

Highlights

  • High-speed 10-gigabit connectivity backed by Cat 6 250 MHz rating
  • Flat 5.8 mm profile runs cleanly along walls and under carpets
  • Gold-plated RJ45 contacts with 50 micron plating resist corrosion
  • Pure bare copper conductors avoid CCA performance loss
  • 65 ft length with snagless clips simplifies LAN setup

Specifications

Length65 ft.

Questions about this item

How much heat or noise does the 30 AWG flat cable generate when run continuously at 10 Gbps?

The cable is passive copper with no active components, so it produces no noise and negligible heat even at full 10 Gbps throughput.

What devices must I already have to use the RJ45 connectors on this 65 ft patch cord?

You need equipment with standard RJ45 Ethernet ports such as a router, switch, PC, gaming console, NAS, VoIP phone or PoE device.

Will the 250 MHz Cat 6 cable work reliably with my older 100 Mbps switch and 10Base-T NIC?

Yes, the cable is backward compatible with 10Base-T, 100BASE-TX and 1000Base-T, so it will negotiate the highest speed both ends support.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.