We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two red 70 cm SATA 22 pin to 7 pin data and Molex 4 pin power cables

Aomoproing

Aomoproing 70CM 22 Pin SATA III 6Gbps Data & Power to SATA 7pin Data & Molex 4pin Combo Cable Red 2pack

SKU CH-ARP9-MZFW9

A 70 cm SATA 3.0 combo cable delivers 6 Gbps data and Molex power to 2.5 or 3.5 inch drives

Pack 2pack

  • Powers SATA drives from Molex 4pin without PSU upgrade
  • 70cm length supports SATA 3.0 6Gbps bandwidth
  • Thin cable design improves airflow inside the case
  • 22-pin combo delivers both data and 12V/5V power
  • Works with 3.5" and 2.5" SATA hard drives

Combo cable for SATA drives

This 22-pin SATA data and power combo cable connects a SATA hard drive or SSD to a motherboard SATA port while drawing power from a Molex 4-pin connector. The 70 cm length suits most desktop and server chassis layouts. It is sold as a two-pack for builders adding or replacing multiple drives.

Check motherboard and power supply

Verify that your motherboard has a free standard SATA data port and that the power supply provides an available Molex 4-pin lead. The cable delivers both 12 V and 5 V lines, so it works with 3.5-inch and 2.5-inch SATA drives without an adapter. Ensure the 70 cm reach fits your drive mounting locations.

Replaces separate data and power cables

The combo design removes the need for a dedicated SATA power connector from the PSU, useful when only Molex leads remain. It supports SATA 3.0 6 Gbps bandwidth for full drive throughput. The upgrade is worthwhile when simplifying cable routing or adding drives to a system with limited native SATA power outputs.

Highlights

  • Powers SATA drives from Molex 4pin without PSU upgrade
  • 70cm length supports SATA 3.0 6Gbps bandwidth
  • Thin cable design improves airflow inside the case
  • 22-pin combo delivers both data and 12V/5V power
  • Works with 3.5" and 2.5" SATA hard drives

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 2-pack include both the SATA 22-pin combo cable and a separate Molex power adapter?

Each of the two cables combines a SATA 7-pin data connector with a SATA 15-pin power plug that draws 12V and 5V from a Molex 4-pin source, so no extra adapter is required.

Should I choose the 70 cm length or a shorter version for a compact 2.5" drive build?

The 70 cm length suits full-tower and mid-tower cases; if your 2.5" drive sits close to the motherboard and PSU, a shorter cable would reduce slack.

Will the 6 Gbps rating deliver full SATA 3.0 speed on a 3.5" mechanical drive?

The cable supports SATA 3.0 6 Gbps bandwidth, but actual throughput depends on the drive and controller; a 3.5" mechanical drive typically saturates well below that ceiling.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.