We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pre-galvanised steel insulation protection shield, 18 in overall length, for 6 to 8 in pipe size

Anvil

Anvil 500340146 Insulation Protection Shield 6 in 18 in length

SKU CH-6DPA-8BY2Y

Pre-galvanised steel shield protects foam or fibreglass insulation on 6–8 in pipes, 18 in long, rated −32 °F to 150 °F

  • Pre-galvanized finish resists corrosion
  • Steel construction withstands 150 °F maximum operating temperature
  • Rated down to -32 °F minimum operating temperature
  • Fits 6 in to 8 in pipe with 10.6 in insulation outside diameter
  • Meets ANSI/MSS SP-69 and Federal Specification A-A-1192A Type 40 standards

Anvil 18 in Protection Shield

Anvil 500340146 is a pre-galvanised steel shield that fits over foam or fibreglass insulation on 6 in to 8 in pipe. It mounts on a clevis hanger and spans 18 in overall length. The shield meets ANSI/MSS SP-69, Federal Specification A-A-1192A Type 40, MSS SP-58 Type 40 and WW-H-171-E Type 41. It is supplied new and ready for installation.

Suits insulated pipe runs

This shield suits installers protecting 10.6 in outside-diameter insulation with 1 in to 2 in thickness on 6 in to 8 in pipe. It operates from -32 Degrees F to 150 Degrees F. It does not suit uninsulated pipe, smaller insulation diameters, or thicknesses outside the stated range. Builders needing other lengths or mount types must select a different shield.

18 in overall length decides fit

The single specification that decides fit is the 18 in overall length combined with the 10.6 in insulation outside diameter and 1 in to 2 in thickness range. Match these three figures to the pipe run before ordering.

Highlights

  • Pre-galvanized finish resists corrosion
  • Steel construction withstands 150 °F maximum operating temperature
  • Rated down to -32 °F minimum operating temperature
  • Fits 6 in to 8 in pipe with 10.6 in insulation outside diameter
  • Meets ANSI/MSS SP-69 and Federal Specification A-A-1192A Type 40 standards

Specifications

BrandANVIL

Questions about this item

Should I pick the 18 in length or another size for my 6 in pipe?

This shield is made in an 18 in overall length and fits pipe sizes 6 in to 8 in with insulation outside diameter 10.6 in and insulation thickness 1 in to 2 in.

What does the 150 °F maximum operating temperature mean once the shield is installed on my pipe?

The steel shield can withstand continuous service up to 150 °F and down to -32 °F, so it will protect foam or fiberglass insulation through normal heating-system temperature swings.

Which standard caps the design — ANSI/MSS SP-69 Type 40 or another spec?

It meets ANSI/MSS SP-69, Federal Specification A-A-1192A, MSS SP-58 and WW-H-171-E, all rated Type 40 or Type 41 for clevis-hanger-mounted insulation protection shields.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.