We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized malleable iron cross fitting with four NPT ports

Anvil

Anvil 311070809 Cross Galvanized Malleable Iron 2 Inch NPT 1500 psi

SKU CH-FC85-HEGKN

Galvanised malleable iron cross fitting with four 2-inch NPT connections rated to 1500 psi at 150 °F

  • ColorSilver
  • TypePipes, Valves & Fittings
  • Galvanized malleable iron resists corrosion
  • Class 300 rating handles 1500 psi at 150 °F
  • 2-inch NPT threads connect four ways
  • ASTM A-197 and ASME B16.3 compliant
  • Operates from -20 °F to 150 °F

Anvil 311070809 Cross Galvanized Malleable Iron 2

This galvanized malleable iron cross fitting provides a four-way connection for piping systems. It is rated for 1500 psi at 150 degrees Fahrenheit WOG and handles saturated steam up to 300 psi. The component suits industrial and commercial plumbing installations requiring a Class 300 threaded junction. Builders needing a different pipe size or a welded connection should select an alternative fitting.

Installation requirements and common issues

The fitting uses NPT threads on all four 2-inch ports and conforms to ASME 16.3 dimensions. Proper thread sealant or tape is essential to achieve a leak-free joint on tapered pipe threads. Over-tightening can crack the malleable iron body, while under-tightening leaves a spiral leak path. The 5-inch outside diameter demands adequate clearance for tool access during assembly.

Sustained load behaviour

The ASTM A-197 malleable iron construction maintains structural integrity across the rated temperature range of -20 to 150 degrees Fahrenheit. Galvanizing resists corrosion during prolonged exposure to water, oil or gas at the full 1500 psi working pressure. The material does not suffer from creep or stress relaxation within these limits, so joint integrity remains stable over long service periods.

Highlights

  • Galvanized malleable iron resists corrosion
  • Class 300 rating handles 1500 psi at 150 °F
  • 2-inch NPT threads connect four ways
  • ASTM A-197 and ASME B16.3 compliant
  • Operates from -20 °F to 150 °F

Specifications

BrandANVIL
ColorSilver
TypePipes, Valves & Fittings

Questions about this item

How can I verify the cross fitting is holding pressure correctly after installation?

Pressurise the system up to the 1500 psi WOG rating at 150 °F and inspect all four NPT threads for leaks; the galvanized malleable iron body should show no seepage at the rated limit.

What comes with the Anvil 311070809 cross and what must I supply separately?

The fitting itself — a 2-inch NPT cross with four outlets, galvanized malleable iron, Class 300 — is the only item in the box; you must provide pipe nipples, thread sealant and any valves or gauges required for your piping layout.

Which version of this cross should I choose for a saturated-steam line?

Select the standard Class 300 model listed; it is rated for 300 psi saturated steam and meets ASTM A-197 and ASME 16.3, making it suitable for steam service within the -20 °F to 150 °F temperature range.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.