We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised malleable iron 45 degree street elbow with female and male threads

Anvil

Anvil 311027403 3/4" FNPT x MNPT Galvanized 45 Degree Street Elbow bathware

SKU CH-DHJD-GV1TN

A galvanized malleable-iron 45-degree street elbow connects 3/4-inch female and male NPT threads for Schedule 40 pipe at 300 psi

  • ColorSilver
  • TypePipes, Valves & Fittings
  • Galvanised coating resists corrosion for long service life
  • 45-degree street elbow connects male and female threads in tight spaces
  • Malleable iron construction withstands 300 psi at 150 °F
  • Class 150 rating suits Schedule 40 piping systems
  • 3/4 inch FNPT x MNPT fits standard plumbing connections

Galvanized 45° Street Elbow

This Anvil fitting connects a 3/4 inch female NPT thread to a 3/4 inch male NPT thread at a forty-five degree angle. It is made from malleable iron with a galvanized silver finish for corrosion resistance. The component suits residential and light commercial plumbing installations. It carries a Class 150 rating for Schedule 40 pipe systems.

Sustained pressure performance

The elbow withstands a maximum operating pressure of three hundred psi at one hundred fifty degrees Fahrenheit. This rating applies to continuous service rather than momentary spikes. The galvanized coating maintains integrity under prolonged exposure to hot water and steam within these limits. Deformation risk remains low when installed within the specified class.

Threaded connection limits

The tapered NPT threads seal through metal-to-metal engagement and require proper joint compound or tape. Over-tightening can crack the malleable iron body, especially across the forty-five degree bend. The fitting is not intended for pressures above three hundred psi or temperatures above one hundred fifty degrees Fahrenheit. It does not suit applications requiring welded or flanged joints.

Highlights

  • Galvanised coating resists corrosion for long service life
  • 45-degree street elbow connects male and female threads in tight spaces
  • Malleable iron construction withstands 300 psi at 150 °F
  • Class 150 rating suits Schedule 40 piping systems
  • 3/4 inch FNPT x MNPT fits standard plumbing connections

Specifications

BrandANVIL
ColorSilver
TypePipes, Valves & Fittings

Questions about this item

Will a 300 psi galvanized elbow run hot or noisy under continuous 150 °F water flow?

The fitting is passive malleable iron with no moving parts, so it generates no noise or heat of its own; it simply withstands up to 300 psi at 150 °F.

What pipe schedule and thread type must I already have to install this 3/4" street elbow?

You need Schedule 40 pipe with 3/4" female NPT threads on one side and 3/4" male NPT threads on the other to match the elbow’s connections.

Can I thread this Class 150 galvanized elbow into older black-iron pipe without leaks?

Yes — both are NPT threads, so the 3/4" male and female ends will seal properly with standard pipe tape or compound.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.