We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver galvanized 90 degree street elbow 3/8 inch FNPT x MNPT

Anvil

Anvil 311016000 3/8" Galvanized 90° Street Elbow

SKU CH-V1X0-MRG5P

Connects 3/8" threaded pipe with a 90° galvanized street elbow rated for Class 150 and 300 psi at 150°F

  • ColorSilver
  • TypePipes, Valves & Fittings
  • Galvanized malleable iron resists corrosion in wet environments
  • 90-degree street elbow connects female and male threads directly
  • Class 150 rating suits Schedule 40 piping systems
  • 300 psi at 150 °F handles standard pressure loads
  • 3/8-inch NPT threads fit common plumbing sizes

3/8" Galvanized 90° Street Elbow

This Anvil malleable iron fitting connects a 3/8 inch female NPT thread to a 3/8 inch male NPT thread at a right angle. The galvanized coating provides corrosion resistance for water, air and oil lines. It is rated for Class 150 service on Schedule 40 pipe.

Capacity and pressure headroom

The elbow handles a maximum operating pressure of 300 psi at 150 degrees Fahrenheit. This covers typical residential and light commercial plumbing pressures with comfortable margin. It runs out in high-pressure hydronic or process systems that exceed the Class 150 rating.

Replaces plain couplings or sweat fittings

Use this street elbow when a direct male-to-female turn saves space compared to a coupling plus a standard elbow. The jump is worth it in tight stud bays or retrofit jobs where threading a female fitting onto an existing nipple is faster than cutting and re-threading pipe.

Highlights

  • Galvanized malleable iron resists corrosion in wet environments
  • 90-degree street elbow connects female and male threads directly
  • Class 150 rating suits Schedule 40 piping systems
  • 300 psi at 150 °F handles standard pressure loads
  • 3/8-inch NPT threads fit common plumbing sizes

Specifications

BrandANVIL
ColorSilver
TypePipes, Valves & Fittings

Questions about this item

Will the 3/8" male thread on this 90° street elbow fit the existing 3/8" female port on my older galvanized pipe?

Yes, the male NPT thread is cut to standard 3/8" dimensions so it will engage the female port on your existing Schedule 40 galvanized pipe.

How can I confirm the joint is holding the rated 300 psi at 150 °F after I thread it in?

Pressurize the system to its working pressure and inspect the threaded connection for any sign of leakage; a dry joint indicates the seal is performing to the Class 150 rating.

Does the box include thread sealant or do I need to buy pipe tape separately?

Only the malleable iron galvanized elbow is supplied; thread sealant or PTFE tape must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.