Antique Light Bulb Co.
Antique Light Bulb Co. 4420 60W 13V PAR46 Sealed Light Bulb
A 60-watt, 13-volt PAR46 sealed-beam incandescent bulb with two contact lugs, 3000 K warm-white output and a 300-hour rated life
- TypeIncandescent Bulbs
- Wattage60
- Color Temperature3000K
- Life Time Hours300 hrs
- 60 W output for bright automotive illumination
- 13 V sealed beam fits PAR46 fixtures directly
- 3000 K warm white light enhances visibility
- 300-hour rated life reduces replacement frequency
- Dimmable flood beam allows adjustable light spread
Purpose-built automotive sealed beam
This 13 V PAR46 sealed beam uses a two-contact lug base and a clear reflector to produce a warm-white flood pattern. The incandescent filament delivers 60 W at a rated 3000 K colour temperature. It is intended for vehicle lighting systems that require this specific sealed-beam format.
Replaces legacy 30 W PAR46 units
The 60 W rating doubles the output of the 30 W 12.8 V version while keeping the same PAR46 envelope and lug base. The upgrade is worthwhile when the original beam no longer provides adequate illumination or when a brighter flood pattern is preferred for the same mounting position.
Sustained output limited to 300 hours
Continuous operation at 13 V and 60 W yields a rated life of 300 hours before filament failure. Heat builds steadily in the sealed reflector, so the bulb is suited to intermittent driving cycles rather than constant-duty applications where a longer-lived light source would be required.
Highlights
- 60 W output for bright automotive illumination
- 13 V sealed beam fits PAR46 fixtures directly
- 3000 K warm white light enhances visibility
- 300-hour rated life reduces replacement frequency
- Dimmable flood beam allows adjustable light spread
Specifications
| Brand | BulbAmerica |
|---|---|
| Type | Incandescent Bulbs |
| Wattage | 60 |
| Color Temperature | 3000K |
| Life Time Hours | 300 hrs |
Questions about this item
Will the 2-contact lug base on this PAR46 bulb fit my existing housing?
The bulb uses a 2-contact lug base designed for PAR46 sockets. Verify your fixture accepts this base type and the 13-volt rating before installation.
How do I install the sealed beam correctly, and what is the common mistake?
Align the two lugs with the socket slots and twist to lock. The frequent error is forcing it without proper alignment, which can bend the lugs or crack the sealed glass envelope.
When will I need to replace this 60-watt incandescent bulb?
Rated life is 300 hours. Expect replacement after roughly that operating time; the filament will eventually fail and the sealed unit cannot be serviced.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



