We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular network video recorder with eight PoE ports on the rear panel

Annke

Annke N98PBK 12MP 8CH PoE NVR 2TB HDD surveillance security system

SKU CH-MY7F-D0GN3

Records up to eight IP cameras at 12MP resolution with built-in 2TB storage and plug-and-play PoE ports

  • TypeOthers
  • Storage Capacity2TB HDD

Storage Capacity 2TB HDD

  • Records up to 12MP resolution for ultra-clear detail
  • 8 PoE ports power cameras over a single cable
  • 2TB HDD installed with capacity up to 8TB
  • H.265+ compression reduces bandwidth and storage needs
  • 4K HDMI output for high-definition live monitoring

Annke 12MP 8CH PoE NVR with 2TB HDD

This network video recorder manages up to eight IP cameras at resolutions up to 12MP. It ships with a pre-installed 2TB hard drive and provides eight PoE ports for plug-and-play camera power and data. The unit decodes H.264, H.264+, H.265 and H.265+ streams and outputs video over HDMI up to 3840×2160 and VGA up to 1920×1080.

Who this suits and who should look elsewhere

Installers who want a single-box recorder with built-in PoE and smart detection for human and vehicle targets will find it fits small-to-medium sites. It is not for buyers who need more than one internal drive bay for larger local storage or who require higher uplink bandwidth than 10/100Mbps.

Deciding specification: 12MP recording at 30fps

The NVR can record and play back at 12MP (4096×3072) across all eight channels at 30 frames per second, provided the connected cameras support that rate. Bandwidth is capped at 80Mbps incoming and outgoing, and deep-learning detection runs on eight channels with compatible cameras or four channels at up to 4MP without camera-side analytics.

Highlights

  • Records up to 12MP resolution for ultra-clear detail
  • 8 PoE ports power cameras over a single cable
  • 2TB HDD installed with capacity up to 8TB
  • H.265+ compression reduces bandwidth and storage needs
  • 4K HDMI output for high-definition live monitoring

Specifications

TypeOthers
Storage Capacity2TB HDD

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What physical space and connections does the Annke N98PBK NVR need for installation?

The recorder requires a DC 48 V power supply, one RJ-45 10/100 Mbps network port for the router, eight PoE RJ-45 ports for cameras, an HDMI monitor up to 3840 × 2160 or VGA up to 1920 × 1080, and a single SATA bay for a hard drive up to 8 TB.

What is the correct order to connect the Annke N98PBK so the PoE cameras are recognised?

Connect the NVR to the router and power it on first, then plug each camera into the PoE ports using Cat5 cable; the unit supplies up to 25.5 W per port so cameras power up automatically without separate adapters.

Which components of the Annke N98PBK will need replacement or maintenance over time?

The pre-installed 2 TB hard drive can be swapped for a larger SATA drive up to 8 TB when storage fills, and the cooling fan should be cleaned periodically to keep power consumption at or below 10 W without drives.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.