ANDHOT 20W USB-C PD 3.0 Wall Charger with 6ft Cable

Fast 20W PD 3.0 charging for Pixel and Galaxy

This 20W USB-C PD 3.0 wall charger ships with a six-foot USB-C to USB-C cable and supports Google Pixel models from the Pixel 2 through the Pixel 10 series as well as Samsung Galaxy S-series phones from the S8 to the S26 range. The adapter delivers up to 20W through its single USB-C port using 5V 3A, 9V 2A or 12V 1.5A profiles. Smart IC technology detects the connected device and negotiates the optimum charging speed automatically. It is built for users who want one compact brick that covers both Pixel and Galaxy fast-charging needs.

Runs cool and quiet at full 20W output

The gallium-nitride power stage operates silently with no audible coil whine during normal charging sessions. Input voltage ranges from 100 to 240V at 50/60Hz, so the adapter draws minimal current from the wall while maintaining its full 20W output. No active fan is present, so thermal load stays low even when charging a Pixel 6 Pro from zero to fifty percent in thirty minutes or a Galaxy S22 to the same level in the same time. The cable is rated for over ten thousand bend cycles, reducing heat buildup at the connectors during repeated use.

Single-port design keeps travel kits light

One USB-C port means you carry a single cable for both power and 480Mbps data sync between compatible phones, tablets such as iPad Pro 11-inch and 12.9-inch models from 2018 to 2022, and other USB-C devices. The six-foot length reaches bedside tables, hotel desks or car consoles without an extension cord. Because the brick integrates the PD controller, no separate power-profile selector or extra dongle is required. Builders who need simultaneous multi-device charging or laptop-class power above 20W will need a different solution.