We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five black dual Molex to PCIe power cables coiled together

Amify

Amify IO2422 Dual 4pin to 6pin Power Cable 15cm

SKU CH-MDTE-N8GP6

Converts dual Molex 4-pin connectors to a single PCIe 6-pin plug with SATA power support for mining rigs, 15 cm long

  • TypeRiser Card
  • External USB Ports1x USB Port
  • Converts two Molex 4‑pin connectors into a single PCIe 6‑pin plug for graphics‑card power
  • 15 cm length keeps cable routing tidy inside compact mining rigs
  • Supplies SATA power to motherboard or drives using the same splitter assembly
  • Five cables in one pack simplify multi‑GPU builds without extra adapters
  • Model IO2422 identifies the exact splitter for repeat orders

Amify IO2422 Power Splitter

This cable converts two Molex 4‑pin connectors into a single PCIe 6‑pin plug and includes a SATA power lead. It is aimed at miners and builders who need extra GPU power connectors from an existing PSU. The 15 cm length keeps routing tight inside compact rigs. Supplied as a pack of five cables.

Build Integration

Each splitter draws from two peripheral Molex outputs and frees a native PCIe connector on the power supply. The short bus reduces clutter around riser cards and mining frames. No additional adapters are required beyond the PSU’s existing Molex leads. The SATA branch can power a drive or riser board simultaneously.

Sustained Load Behaviour

Under continuous mining loads the dual‑Molex feed shares current across both source wires, lowering per‑pin stress. The 15 cm conductors limit voltage drop compared with longer extensions. Connectors are rated for standard peripheral and PCIe power specifications. Heat stays manageable when the PSU rails are not already saturated.

Highlights

  • Converts two Molex 4‑pin connectors into a single PCIe 6‑pin plug for graphics‑card power
  • 15 cm length keeps cable routing tidy inside compact mining rigs
  • Supplies SATA power to motherboard or drives using the same splitter assembly
  • Five cables in one pack simplify multi‑GPU builds without extra adapters
  • Model IO2422 identifies the exact splitter for repeat orders

Specifications

TypeRiser Card
External USB Ports1x USB Port

Questions about this item

What limits the current when the IO2422 cable runs a mining rig continuously?

The 15 cm length and dual Molex 4-pin source connectors set the practical current limit for sustained loads.

How much heat does the cable generate during all-day operation?

The short 15 cm run keeps resistive losses low, so the cable stays cool under normal mining currents.

Which power supply connectors must I already have to use this cable?

Your PSU needs two free Molex 4-pin outputs for each IO2422 adapter.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.