American Lock
American Lock Weather Resistant Padlock 1-1/8 In H 5 Pin Steel
Weather-resistant steel padlock with a 5-pin cylinder and hardened boron shackle, keyed alike to 26453
- Selling UnitBox
- TypeWeather Resistant
- Weather-resistant design withstands harsh outdoor conditions
- Boron alloy shackle resists cutting and sawing attempts
- Five-pin cylinder provides reliable keyed security
- Keyed-alike convenience uses single key 26453
- Solid steel body delivers superior corrosion resistance
All-Weather Steel Padlock
The American Lock weather-resistant padlock is a keyed-alike steel lock built for outdoor and corrosive environments. Its hardened boron alloy shackle and solid steel body resist cutting and sawing. A patented keyway cover and shackle seals block moisture and debris. Two brass keys are included in the box.
Suits Gates and Harsh Sites; Not for Keyless Entry
This padlock suits securing gates, sheds, storage units and industrial equipment where keys are preferred and key control number 26453 simplifies management. Buyers who want combination access, electronic credentials or a non-keyed locking method should look at something else. The keyed-alike configuration means every lock in the set opens with the same key.
1-1/8 Inch Shackle Clearance Handles Standard Hasps
The 1-1/8 inch shackle height and 3/4 inch width clear typical hasps, chains and staple plates. The 5/16 inch boron shackle diameter resists bolt cutters within its class. Very thick chain links or oversized staple plates may not fit through the shackle opening. Five-pin cylinder provides standard pick resistance for the category.
Highlights
- Weather-resistant design withstands harsh outdoor conditions
- Boron alloy shackle resists cutting and sawing attempts
- Five-pin cylinder provides reliable keyed security
- Keyed-alike convenience uses single key 26453
- Solid steel body delivers superior corrosion resistance
Specifications
| Brand | American Lock |
|---|---|
| Selling Unit | Box |
| Type | Weather Resistant |
Questions about this item
Does the 5-pin cylinder with key control #26453 require a specific keyway that my existing keys won't fit?
The padlock uses key control #26453 and comes with two brass keys cut alike; it will not accept keys from a different key control number.
Can the 5/16-inch boron alloy shackle be swapped for a longer one to fit my older hasp?
The shackle is fixed at 1-1/8 inch height and 3/4 inch width; it is not interchangeable, so the hasp must accommodate these exact dimensions.
How can I confirm the WeatherBuilt seals and BumpStop cylinder are functioning after I install it outdoors?
The keyway cover should snap shut automatically, the shackle should rotate freely when unlocked, and the cylinder must resist turning when a bump key is applied.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



