We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
ALTRONIX AL1024ULXB2 power supply board, green PCB with components, metal enclosure visible

ALTRONIX

ALTRONIX AL1024ULXB2 24VDC 10A Power Supply

SKU CH-0E3J-0ESCG

Converts 115VAC 60Hz input to a single 24VDC 10A non power limited output for security systems

  • TypeSurface Mount Base
  • UL Recognised for safety compliance
  • Converts 115 VAC to 24 VDC output
  • Delivers 10 A continuous current capacity
  • Operates on standard 60 Hz mains frequency

ALTRONIX AL1024ULXB2 24VDC 10A Power Supply

The ALTRONIX AL1024ULXB2 is a UL Recognized power supply and charger designed for security and access control installations. It converts a 115VAC 60Hz input into a single 24VDC non power limited output rated at 10A. This unit suits installers who need a reliable surface mount base for powering locks, controllers and peripheral devices. It is not suited for applications requiring multiple isolated outputs or power limited circuits.

Thermals noise and power draw

The supply operates from a standard 115VAC 60Hz mains connection and delivers a continuous 24VDC 10A output. Normal use produces heat consistent with linear regulation, so adequate ventilation around the surface mount enclosure is recommended. No fan is fitted, so acoustic noise is minimal in typical indoor environments. Power draw on the AC side scales with the connected DC load up to the rated 10A capacity.

Highlights

  • UL Recognised for safety compliance
  • Converts 115 VAC to 24 VDC output
  • Delivers 10 A continuous current capacity
  • Operates on standard 60 Hz mains frequency

Specifications

BrandALTRONIX
ModelAL1024ULXB2
TypeSurface Mount Base

Questions about this item

How is the AL1024ULXB2 surface-mount base installed, and what wiring step is often missed?

Mount the base securely, connect 115VAC 60Hz input wires to the labelled terminals, then attach the 24VDC output leads observing polarity; the step often missed is confirming the output is non power limited before connecting downstream devices.

What maintenance or replacement will the AL1024ULXB2 need over time?

Periodically inspect the 115VAC input and 24VDC output connections for corrosion or loosening; the unit has no user-serviceable parts, so replace the entire board if the 10A output fails or voltage drifts from 24VDC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.