Alphacool
Alphacool Y-Cable RGBW 5-Pin to 3x 5-Pin 60cm Black internal power cable
Splits one 5-pin RGBW header into three connections for Alphacool RGBW components, 60 cm long with four connector bridges included
- ColorBlack
- Cable Length1.97 ft.
- Connect up to three RGBW devices to one header
- Four connector bridges included for flexible linking
- 60 cm cable length suits most case layouts
- Black finish blends with dark-themed builds
- Designed for Alphacool RGBW 5-pin component family
Y-Cable for Alphacool RGBW 5-Pin Devices
The Alphacool Y-Cable splits a single 5-pin RGBW header into three outputs. It connects up to three Alphacool RGBW components to one motherboard, graphics card or controller header. The cable runs 60 cm and ships in black with four male and female connector bridges included.
Builders Synchronising Multiple RGBW Strips
This cable suits anyone linking several Alphacool RGBW fans, strips or water-blocks to a single 5-pin header. It will not help builders using 3-pin ARGB or 4-pin RGB headers, nor those needing longer reach than 60 cm or extra power injection for very long runs.
One 5-Pin Input Drives Three 5-Pin Outputs
The decisive spec is the 1-to-3 5-pin RGBW split. If your components and controller use the Alphacool 5-pin RGBW standard, this cable consolidates them; otherwise a different pin-out or protocol is required.
Highlights
- Connect up to three RGBW devices to one header
- Four connector bridges included for flexible linking
- 60 cm cable length suits most case layouts
- Black finish blends with dark-themed builds
- Designed for Alphacool RGBW 5-pin component family
Specifications
| Color | Black |
|---|---|
| Cable Length | 1.97 ft. |
Questions about this item
Is the 60 cm length enough to reach from my motherboard RGB header to three Alphacool RGBW components in a full-tower case?
The cable measures 60 cm (1.97 ft) end-to-end, which typically spans a mid-tower motherboard tray to front-mounted reservoirs or blocks; measure your routing path before ordering.
What does the single 5-pin input actually drive when I plug in three devices?
One 5-pin RGBW header powers and controls all three connected components simultaneously, so they share the same colour and effect signals from the motherboard, graphics card or controller.
Does the 5-pin connector follow a standard pinout or is it proprietary to Alphacool RGBW gear?
The cable uses Alphacool's own 5-pin RGBW layout and includes four male/female connector bridges, so it only works with Alphacool RGBW family components.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



