We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six matte-black straight compression fittings with G1/4 threads for 16/10mm tubing

Alphacool

Alphacool HF G1/4 16/10mm Compression Fitting Deep Black Six Pack

SKU CH-BQYQ-VJF55

Six G1/4 straight compression fittings for 16/10 mm tubing in deep black finish

  • TypeFittings
  • High flow inner diameter for unrestricted coolant movement
  • G1/4 thread fits 95% of water-cooling components
  • Straight 16/10 mm barb secures compatible tubing
  • Deep Black chromatised finish resists peeling and fading
  • Six-pack supplies fittings for a full custom loop

High-flow compression fittings

The Alphacool HF G1/4 16/10mm compression fittings are built for custom water-cooling loops that demand a large inner diameter. Each straight screw fitting accepts tubing with a 16 mm outer diameter and a 10 mm inner diameter. The G1/4 thread on the component side fits 95% of standard water blocks, radiators and reservoirs. Six fittings are supplied in a single pack, covering the typical port count for a CPU and GPU loop.

Deep Black finish and brass construction

A chromatised Deep Black coating is bonded to the brass body to resist peeling and maintain colour intensity over time. The straight design keeps tubing runs clean and simple without adding bulk. No moving parts or seals beyond the standard compression rings mean there is nothing to wear out or generate noise. Power draw is zero and the fittings add no thermal load to the system.

Sustained loop integrity

Under continuous pump pressure the compression rings maintain a reliable seal on 16/10mm tubing without retightening. The generous inner bore preserves flow rates during extended gaming or rendering sessions, preventing the restriction that smaller fittings can introduce. The six-pack quantity matches common dual-block builds so the loop can be completed without ordering extra parts. Builders using smaller tubing or angled connections will need different fittings.

Highlights

  • High flow inner diameter for unrestricted coolant movement
  • G1/4 thread fits 95% of water-cooling components
  • Straight 16/10 mm barb secures compatible tubing
  • Deep Black chromatised finish resists peeling and fading
  • Six-pack supplies fittings for a full custom loop

Specifications

TypeFittings

Questions about this item

How do I install the G1/4 thread on a component and what is the common mistake?

Screw the G1/4 thread into the component port by hand then tighten a quarter turn with a wrench; the mistake is over-tightening which can strip the brass threads.

What maintenance will these Deep Black fittings need later?

The chromatised finish is bonded to the brass so the colour will not peel; only periodic re-torquing of the compression rings is required if a leak appears.

What limit appears first when running high flow through the 16/10mm hose continuously?

The 16/10mm inner diameter sets the maximum flow rate; sustained flow beyond that will cause pressure drop and turbulence before any fitting failure occurs.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.