We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome 45-degree revolvable compression fitting for 13/10 tubing with G1/4 thread

Alphacool

Alphacool HF 13/10 45° Revolvable Compression Fitting Chrome 17151

SKU CH-FCF8-Z3F4Z

A 45° revolvable compression fitting with 13 mm inner and 10 mm outer diameter for high-flow custom loops

  • TypeFittings
  • High-flow 13 mm inner diameter for unrestricted coolant movement
  • 45° revolvable angle simplifies tight-loop routing
  • Chrome finish bonded to brass resists peeling over time
  • G1/4 thread fits standard water-cooling components
  • Supplied as a single 17151 compression fitting

High-Flow Chrome Compression Fitting

This Alphacool HF 13/10 fitting connects 13/10 tubing to a G1/4 port with a 45-degree revolvable angle. The chrome-plated brass body uses a chromatising process that bonds the finish to the metal for lasting colour. It is sold as a single piece, part number 17151, for custom water-cooling loops.

Builders who need a 45-degree offset

The revolvable design lets you orient the barb after tightening, simplifying tube routing in tight spaces. The high-flow internal diameter supports unrestricted coolant movement. Buyers using different tubing sizes, thread standards or straight-run requirements will need alternative fittings.

13/10 tubing compatibility

This fitting only accepts tubing with a 13 mm outer diameter and 10 mm inner diameter. Verify your tubing dimensions before purchase; mismatched sizes will not seal correctly. No other size adapters are included in the package.

Highlights

  • High-flow 13 mm inner diameter for unrestricted coolant movement
  • 45° revolvable angle simplifies tight-loop routing
  • Chrome finish bonded to brass resists peeling over time
  • G1/4 thread fits standard water-cooling components
  • Supplied as a single 17151 compression fitting

Specifications

TypeFittings

Questions about this item

What inner-diameter tubing do I need for the 13/10 size?

The fitting is made for tubing with a 10 mm inner diameter and a 13 mm outer diameter.

Will the G1/4 thread work with my existing water blocks and radiators?

Yes, the G1/4 thread is the standard size used on almost all current water-cooling components.

How can I confirm the 45° revolvable joint is seated correctly after installation?

The fitting should sit firmly with no leakage, and the angled section should rotate freely to align your tubing run.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.