We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome 45-degree revolvable compression fitting G1/4 10/16mm ID/OD

Alphacool

Alphacool G1/4 3/8"ID 5/8"OD 45° Revolvable Compression Fitting Chrome 17083

SKU CH-2HXC-JPHZC

A 45-degree revolvable compression fitting with G1/4 thread for 10 mm inner diameter tubing

  • TypeFittings

Color Chrome

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Precision 45° Revolvable Fitting

This Alphacool compression fitting joins 3/8" inner diameter tubing to a G1/4 thread at a fixed 45-degree angle. The revolvable body lets you orient the bend after tightening so tube routing stays clean. It suits custom-loop builders who need a compact directional change without adding extra fittings. The chrome finish resists peeling through a bonded chromatising process.

10 mm Inner Diameter for High Flow

The 10 mm bore (16/10 sizing) is the single spec that decides fit: it only accepts tubing with a 3/8" ID and 5/8" OD. Builders using 1/2" ID or 7/16" ID hose cannot use this fitting. No adapter is included, so verify your tubing dimensions before ordering.

Single Fitting Ships Ready to Install

The box contains one chrome fitting with its compression rings and G1/4 o-ring pre-seated. No tools, lubricant or extra seals are bundled. You simply push the tubing home and tighten the collar. Multi-pack buyers must order the quantity they need separately.

Highlights

  • High flow with true 10 mm inner diameter
  • 45° revolvable design simplifies tight tubing routes
  • Chrome finish bonded to brass resists peeling
  • G1/4 thread fits standard water-cooling components
  • Compression style seals 16 mm OD tubing securely

Specifications

TypeFittings

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does the 45° angle do for the tubing run inside the case?

The fixed 45° bend lets the tube leave the port at an angle, helping it clear nearby components without a sharp kink.

How does the G1/4 thread connect to the rest of the loop?

The G1/4 male thread screws into any standard G1/4 port on radiators, blocks, reservoirs or pumps.

What tubing sizes fit this compression fitting?

It accepts tubing with a 10 mm inner diameter and 16 mm outer diameter, matching 3/8" ID × 5/8" OD hose.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.