We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome 90-degree revolvable compression fitting G1/4 13/10

Alphacool

Alphacool G1/4 13/10 90° Revolvable Compression Fitting Chrome 17074

SKU CH-MA98-FZ18S

A 90° revolvable G1/4 compression fitting for 13/10 mm tubing in chrome finish

  • TypeFittings
  • High inner diameter enables high coolant flow
  • 90° revolvable design allows flexible tube routing
  • Chrome finish bonded to brass for lasting colour
  • G1/4 thread fits standard water-cooling components
  • Compression fitting suits 13/10 tubing dimensions

Chrome compression fitting for custom loops

This chrome-finished G1/4 compression fitting accepts tubing with a 13 mm inner diameter and 10 mm outer diameter. Its 90-degree revolvable body lets builders route hard or soft tubing around tight corners without kinking. The knurled compression nut secures the tube with a firm mechanical grip that resists vibration and thermal cycling.

13/10 mm tubing compatibility decides fit

Only tubing measuring exactly 13 mm inside and 10 mm outside will seal correctly in this fitting. Smaller or larger diameters will either leak or fail to clamp, so verify your tubing specification before ordering.

Single fitting per pack supports incremental builds

The package contains one 90-degree revolvable fitting, letting you buy precisely the quantity your loop requires. No extra tools, O-rings or adapters are included, so budget for any additional straight fittings or drain valves your design needs.

Highlights

  • High inner diameter enables high coolant flow
  • 90° revolvable design allows flexible tube routing
  • Chrome finish bonded to brass for lasting colour
  • G1/4 thread fits standard water-cooling components
  • Compression fitting suits 13/10 tubing dimensions

Specifications

TypeFittings

Questions about this item

What does the 13/10 size mean for flow once the fitting is installed?

The 13 mm inner diameter gives a wide, unrestricted path that matches 1/2 inch OD tubing, so coolant moves through the 90° bend with minimal resistance.

How does the G1/4 thread limit what I can connect it to?

The G1/4 thread is the standard port size on almost every water-block, radiator, pump and reservoir, so the fitting screws directly into any of those components.

What clearance does the 90° revolvable body need to fit inside my case?

The revolvable 90° elbow lets you rotate the compression nut after threading, so you only need enough room for the fitting’s own height once the tube is pushed in.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.