We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome 45-degree compression fitting for 16mm hard tube, brass body with knurled nuts, 46 by 23 by 36mm

Alphacool

Alphacool Eiszapfen 16mm HardTube 45° L-Connector Chrome 17404

SKU CH-DACF-2086E

A 45° angled chrome compression fitting that joins two 16 mm hard tubes, with a knurled union nut for secure sealing in custom water-cooling loops

  • FeaturesAlphacool's Eiszapfen connector series is the high-end execu
  • 45° angle simplifies hard-tube routing
  • Knurled union nut secures 16mm tube O-ring
  • Chrome coating resists chipping and peeling
  • Brass construction supports high-flow cooling loops
  • Compact 46 × 23 × 36 mm footprint

Alphacool Eiszapfen 16mm 45° Chrome Fitting

This Alphacool Eiszapfen fitting is a 45° compression connector designed for 16mm hard tubes made of plexi or brass. It features a durable chrome finish applied with a special procedure that resists chipping and peeling. The union nut uses slanted corners to press the O-ring firmly against the tube for a secure hold. Model 17404 measures 46mm in length, 23mm in width and 36mm in height.

For custom loops using 16mm rigid tubing

This connector suits builders assembling a custom water-cooling loop with 16mm outer-diameter rigid tubes who need a 45° change in direction. It is not intended for soft tubing installations or for situations requiring a straight pass-through or a different angle. The chrome coating matches other Eiszapfen components for a consistent look.

16mm hard-tube compatibility decides fit

The single specification that determines suitability is the 16mm tube size for plexi or brass on both ends. If the loop uses a different outer diameter or flexible tubing, this fitting will not seal correctly. Verify the tube material and dimensions before purchase.

Highlights

  • 45° angle simplifies hard-tube routing
  • Knurled union nut secures 16mm tube O-ring
  • Chrome coating resists chipping and peeling
  • Brass construction supports high-flow cooling loops
  • Compact 46 × 23 × 36 mm footprint

Specifications

BrandAlphacool
Model1013355
FeaturesAlphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings!

Questions about this item

What does the 45° angle do once the fitting is in the loop?

The 45° bend lets you route 16 mm hard tube around tight corners without forcing the tube into sharp bends that could kink or stress the O-ring seal.

Which tube standard does the 16 mm compression interface accept?

It takes 16 mm outer-diameter plexi or brass hard tube on both ends, sealing with the knurled union nut and internal O-ring.

What clearance does the 46 mm × 23 mm × 36 mm chrome brass body need for installation?

The fitting body measures 46 mm long, 23 mm wide and 36 mm high, so allow enough space around those dimensions to tighten both union nuts by hand or tool.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.