We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Square pale grey thermal pad with fabric reinforcement 100x100x1mm

Alphacool

Alphacool Eisschicht Ultra Soft Thermal Pad 100x100x1mm 3W/mK 1018057

SKU CH-V87P-RQKZB

Ultra-soft thermal pad with embedded fabric for efficient heat transfer and component protection

  • FeaturesAs a basic component or spare part include thermal pads in a
  • Thermal paste with embedded fabric improves heat transfer
  • 3 W/mK conductivity fills microscopic gaps efficiently
  • 100 x 100 x 1 mm size fits common components
  • Non-conductive material prevents electrical short circuits
  • Ultra-soft consistency protects delicate solder joints

Alphacool Eisschicht Ultra Soft Pad 1mm

The Alphacool Eisschicht Ultra Soft thermal pad measures 100 by 100 by 1 millimetres and carries part number 1018057. It consists of thermal paste with an embedded fabric layer that improves surface contact and air displacement. Thermal conductivity is rated at 3 W/mK and the material is not electrically conductive. Its ultra-soft consistency avoids pressure on delicate components or solder joints.

PC builders filling small gaps on GPUs or memory

This pad suits enthusiasts who need a compliant 1 mm interface for tight tolerances on graphics cards, VRM heatsinks or memory modules. The fabric-reinforced paste structure conforms well to microscopic unevenness without stressing PCB components. Buyers requiring higher thermal conductivity for large dies or those who prefer a traditional solid pad should consider other options.

Simple cut-to-size installation

The 100 mm square sheet can be trimmed with scissors or a craft knife to match the exact component footprint. Peel the protective liner, place the pad, and seat the heatsink with even pressure. Common issues include tearing the soft material during handling or leaving the liner on one side, both of which reduce thermal transfer.

Highlights

  • Thermal paste with embedded fabric improves heat transfer
  • 3 W/mK conductivity fills microscopic gaps efficiently
  • 100 x 100 x 1 mm size fits common components
  • Non-conductive material prevents electrical short circuits
  • Ultra-soft consistency protects delicate solder joints

Specifications

BrandAlphacool
Model1018057
Part Number1018057
FeaturesAs a basic component or spare part include thermal pads in any well organized computer tinker!

Questions about this item

What component surfaces must be clean and free of old compound before applying the 100 x 100 mm pad?

Both the heatsink base and the chip or VRM surface should be cleaned with isopropyl alcohol and a lint-free cloth so the ultra-soft pad makes full contact.

Can the 1 mm thick pad replace a thinner factory pad on an older graphics card without over-compressing the die?

Yes, its ultra-soft consistency compresses easily to fill gaps without putting excessive pressure on solder joints or the GPU die.

How can I verify the pad is seated correctly after installation?

Check that the pad covers the entire contact area evenly and that temperatures under load drop to expected levels for the component being cooled.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.