We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pink rectangular thermal pad 120 by 20 by 1.5 millimetres

Alphacool

Alphacool Eisschicht Light Thermal Pad 7W/mK 120x20x1.5mm Pink 12862

SKU CH-M3NA-MXA58

A 7 W/mK thermal pad in a 120 x 20 x 1.5 mm pink sheet, self-adhesive and trimmable for RAM, GPU or motherboard coolers

  • FeaturesAlphacool's ultimate solution lets you cool your computer wi
  • High thermal conductivity of 7W/mK moves heat fast
  • Thin 1.5mm profile fits tight gaps between chip and cooler
  • Self-adhesive surface holds position without extra paste or clips
  • Elastic material conforms to uneven surfaces for full contact
  • Pre-cut 120x20mm strips match RAM cooler dimensions exactly

Alphacool Eisschicht Light 7W/mK thermal pad

The Alphacool Eisschicht Light is a 7W/mK thermal pad designed for DIY cooling projects. It targets builders who need a flexible, self-adhesive interface material for RAM modules, motherboard chipsets or graphics card components. The pink sheet measures 120x20x1.5mm and can be cut with scissors to fit exact component dimensions.

Thermal performance at 7W/mK conductivity

With a rated conductivity of 7W/mK the pad transfers heat efficiently between chips and cooler bases during normal operation. Its elastic structure maintains consistent contact across uneven surfaces without pumping out over time. The material stays pliable so it continues to fill microscopic gaps as components expand and contract through thermal cycles.

Pre-cut 120x20mm format for RAM coolers

The 120x20mm rectangle matches common RAM cooler strips so installation requires no trimming for that use case. Self-adhesive surfaces hold the pad in place while you mount the heatsink, removing the need for separate thermal tape. Builders working on GPU VRMs or larger chipset blocks will need the 100x100mm sheet instead, which is not included in this pack.

Highlights

  • High thermal conductivity of 7W/mK moves heat fast
  • Thin 1.5mm profile fits tight gaps between chip and cooler
  • Self-adhesive surface holds position without extra paste or clips
  • Elastic material conforms to uneven surfaces for full contact
  • Pre-cut 120x20mm strips match RAM cooler dimensions exactly

Specifications

BrandAlphacool
Model1013989
Part Number1013989
FeaturesAlphacool's ultimate solution lets you cool your computer with a sheet of ice. Not an ice sheet in the conventional sense, made of frozen water, but a sheet that brings every chip down to freezing. The properties of these new thermal pads speak for themselves.

Questions about this item

How do I install the 120x20mm pad on my RAM cooler, and what step is often missed?

Cut the pad to size with scissors, peel the protective film from both sides, then press it firmly between the memory chips and the cooler so the self-adhesive faces make full contact; the step often missed is removing both liner layers.

Will the 7W/mK pad degrade or need replacement after extended use?

The silicone-based pad stays flexible and self-adhesive over time; it does not dry out like paste, so replacement is only needed if the cooler is removed or the pad is physically damaged.

What thermal limit appears first when the 1.5mm pad runs under sustained load?

At 7W/mK conductivity the pad itself becomes the bottleneck before the cooler saturates, so the temperature drop across the 1.5mm thickness is the first limiting factor during prolonged heavy use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.