We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear acrylic pump top for DDC 310 pump with RGB strip

Alphacool

Alphacool Eisdecke DDC Pump Top V.4 Plexi 1015170

SKU CH-1N11-W1Q73

Clear acrylic pump top for DDC 310 or DDC pumps with three 1/4" inlets, three 1/4" outlets and mounting at 45 or 90 degrees

  • ColorClear
  • FeaturesQuiet, strong and spectacular! The Alphacool Eisdecke Plexi
  • Clear plexi top showcases pump internals
  • Mount vertically, horizontally, at 45° or 90° angles
  • Three G1/4 inlets and three G1/4 outlets for flexible routing
  • Pre-fitted RGB strip with 4-pin connector syncs with common controllers
  • Compatible with Laing DDC310 and all DDC pump versions

Alphacool Eisdecke DDC Pump Top V.4 Plexi

The Alphacool Eisdecke DDC Pump Top V.4 Plexi is a clear acrylic replacement top designed for Laing DDC310 and DDC series pumps. It replaces the factory housing to provide three 1/4-inch inlet ports and three 1/4-inch outlet ports. A pre-installed RGB strip connects via a standard 4-pin header for lighting integration. Patent-pending flat screw plugs create a flush finish. The assembly includes mounting feet for versatile orientation.

Suits custom-loop builders upgrading a DDC pump

This top suits enthusiasts building a custom water-cooling loop who need multiple port options and want to showcase coolant flow through transparent acrylic. It also fits users planning a dual-pump serial configuration using the additional threads. Buyers using a Laing D5, VPP755 or DC-LT pump cannot install this top because the mounting pattern and sealing geometry are specific to the DDC platform. Systems without a standard 4-pin RGB header will not control the integrated lighting.

Mounting angle flexibility: 0, 45, 90 degrees

The included feet allow the pump to be secured vertically, horizontally or at 45 and 90 degree angles relative to the mounting surface. This range lets builders route tubing in tight chassis spaces where a fixed-orientation top would conflict with other components. The specified angles are the only factory-supported orientations; other positions are not validated for seal integrity or structural support.

Highlights

  • Clear plexi top showcases pump internals
  • Mount vertically, horizontally, at 45° or 90° angles
  • Three G1/4 inlets and three G1/4 outlets for flexible routing
  • Pre-fitted RGB strip with 4-pin connector syncs with common controllers
  • Compatible with Laing DDC310 and all DDC pump versions

Specifications

BrandAlphacool
Model1015170
Part Number1015170
ColorClear
FeaturesQuiet, strong and spectacular! The Alphacool Eisdecke Plexi is the perfect pump top to take your pump to the next stage.

Questions about this item

What G1/4 thread ports does the 1015170 pump top provide?

The top includes three G1/4 inlet ports and three G1/4 outlet ports for flexible loop routing.

Which mounting angles does the Eisdecke V.4 support?

It can be mounted vertically, horizontally, at 45° or 90° using the included feet.

How is the pre-installed RGB strip connected?

The strip uses a 4-pin male RGB connector that plugs into any standard motherboard or controller header.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.