We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey square thermal adhesive pad 15x15x0.5mm with protective foil on both sides

Alphacool

Alphacool Double-Sided Adhesive Pad 15x15x0.5mm 1W/mK Grey diy cooling

SKU CH-2M2M-8RZZ3

Double-sided thermal adhesive pad, 15×15×0.5 mm, 1 W/mK conductivity, mounts heatsinks without brackets or hole spacing

  • FeaturesAlphacool s answer to the often difficult situation of being
  • Mount heatsinks anywhere without brackets or hole spacing
  • Double-sided adhesive holds up to 16 N per 25 mm
  • Thermal conductivity of 1 W/mK moves heat from component to cooler
  • Thin 0.5 mm profile fits tight clearances between surfaces
  • 15 mm square pad sized for small VRM or memory coolers

Alphacool Thermal Adhesive Pad 15x15mm

This double-sided pad bonds a heatsink directly to a component when conventional screw mounts are absent or misaligned. The 15 x 15 x 0.5 mm sheet suits small VRM, memory or chipset coolers in custom loops or compact builds. It replaces mechanical fasteners entirely, letting you position the heatsink at any desired spot without hole-spacing constraints.

Grey Silicone Pad With 1W/mK Conductivity

The grey silicone material delivers a thermal conductivity of 1W/mK so heat moves from the component into the heatsink instead of being trapped by the adhesive layer. A protective foil covers both faces and peels away to reveal a tacky, rubber-like surface that grips immediately. Rated at 16N per 25 mm, the bond resists shock, vibration and sustained pressure during transport or daily use.

Pre-Cut Sheet For DIY Cooling Projects

Each piece arrives as a single 15 x 15 mm square ready to apply without cutting tools or messy paste. The pad serves as both thermal interface and structural mount, reducing part count in space-constrained assemblies such as GPU or motherboard VRM upgrades. Builders who need larger bonding areas or higher conductivity values will require a different solution.

Highlights

  • Mount heatsinks anywhere without brackets or hole spacing
  • Double-sided adhesive holds up to 16 N per 25 mm
  • Thermal conductivity of 1 W/mK moves heat from component to cooler
  • Thin 0.5 mm profile fits tight clearances between surfaces
  • 15 mm square pad sized for small VRM or memory coolers

Specifications

BrandAlphacool
Model31085
Part Number31085
FeaturesAlphacool s answer to the often difficult situation of being unable to mount the heatsink conventionally. With this double-sided thermal adhesive pad from Alphacool it is possible to mount a heatsink at any desired spot without having to worry about mounts, hole spacing or other constructive details.

Questions about this item

What does the 1 W/mK thermal conductivity mean for heat transfer?

The pad conducts heat at up to 1 W/mK, providing a thermal path between the component and heatsink while also bonding them together.

What surface area does each 15x15 mm pad cover and what clearance is needed?

Each pad is 15 mm by 15 mm and 0.5 mm thick, so the mounting surface must be at least that large and flat enough for full contact.

How do I install the pad without trapping air bubbles?

Peel the protective foil from both sides, align the white pad on the component, press firmly to bond, then attach the heatsink and apply even pressure to spread the adhesive.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.