We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey square thermal pad sheet 100x100x1mm with protective film

Alphacool

Alphacool Apex Soft Thermal Pad 14W/mK 100x100x1mm Grey 13020

SKU CH-8D3P-NG08K

High-performance thermal pad with 14W/mK conductivity, soft consistency for better component contact and long-lasting heat transfer without drying out

  • FeaturesThe Apex Soft are Alphacool's high-end solution in the range
  • High thermal conductivity of 14 W/mK moves heat fast
  • Soft material conforms like paste for better contact
  • No dry-out or hardening keeps performance stable long term
  • Easy to cut with foil on for clean custom fit
  • 100 × 100 × 1 mm sheet covers VRMs and memory modules

Alphacool Apex Soft Thermal Pad 14W/mK

This high-end thermal pad is designed for PC builders and enthusiasts who need reliable heat transfer between components and coolers. Its soft consistency allows it to conform closely to uneven surfaces, making it suitable for voltage converters, VRMs, and other sensitive parts where excessive mounting pressure could cause damage. The material behaves similarly to thermal paste while remaining a solid pad.

14W/mK thermal conductivity

The single specification that determines suitability is the thermal conductivity rating of 14W/mK. This figure indicates how effectively the pad conducts heat away from the component to the heatsink. Buyers should match this value to the thermal requirements of their specific application to ensure adequate cooling performance.

100x100x1mm sheet with long-term stability

The pad measures 100x100x1mm and can be cut to size with scissors while the protective foil remains attached, leaving clean edges. Unlike standard silicone pads, the Apex Soft material does not dry out or harden over time, so it maintains its thermal performance for extended periods without degradation. It comfortably handles typical VRM and memory module cooling but may not provide sufficient thickness for larger gaps between cooler and component.

Highlights

  • High thermal conductivity of 14 W/mK moves heat fast
  • Soft material conforms like paste for better contact
  • No dry-out or hardening keeps performance stable long term
  • Easy to cut with foil on for clean custom fit
  • 100 × 100 × 1 mm sheet covers VRMs and memory modules

Specifications

BrandAlphacool
Model4250197130202
FeaturesThe Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.

Questions about this item

How much heat does the 14 W/mK rating move in a real build?

The 14 W/mK conductivity lets the pad transfer heat almost like a paste, so VRMs and memory chips run cooler under load than with standard pads.

What interface or standard governs this thermal pad and what does it limit?

There is no electrical interface; the pad simply sits between component and heatsink, and its 1 mm thickness sets the maximum gap it can bridge without losing contact.

What physical space and mounting does the 100 × 100 × 1 mm pad need?

It fits any 100 mm square area, is 1 mm thick, and can be trimmed with scissors while the protective foil stays on for clean edges.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.