We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome G1/4 compression fitting for 13/10mm tubing

Alphacool

Alphacool 17077 G1/4 13/10mm Compression Fitting Chrome

SKU CH-GHCJ-BDHRV MPN 17077

Connects 13/10 mm tubing to a G1/4 thread with a high-flow bore and durable chrome-plated brass finish

  • FeaturesThis connector can be used to connect 13/10mm tubing with a
  • High-flow inner diameter for unrestricted coolant movement
  • Chrome finish bonded to brass prevents peeling or fading
  • G1/4 thread connects 13/10 mm tubing securely
  • Elegant design matches Alphacool series for cohesive builds
  • Single fitting supplied ready for custom loop assembly

Chrome G1/4 compression fitting

The Alphacool 17077 is a chrome-plated brass compression fitting with a G1/4 thread for custom liquid-cooling loops. It connects 13/10mm tubing securely and suits builders who value a high-flow internal diameter and a durable finish.

Upgrade from standard barbs

This fitting replaces basic barb or push-fit connectors that can restrict flow or loosen over time. The compression design locks 13/10mm tube firmly in place and the chromatised chrome surface resists peeling, making the swap worthwhile when reliability and aesthetics matter.

For custom-loop builders using 13/10mm tube

It suits enthusiasts assembling a loop with matching Alphacool tubing who want a chrome accent. Builders running a different tube size or thread standard should look elsewhere, as will anyone needing angled or rotary adapters for tight routing.

Highlights

  • High-flow inner diameter for unrestricted coolant movement
  • Chrome finish bonded to brass prevents peeling or fading
  • G1/4 thread connects 13/10 mm tubing securely
  • Elegant design matches Alphacool series for cohesive builds
  • Single fitting supplied ready for custom loop assembly

Specifications

BrandAlphacool
Model17077
FeaturesThis connector can be used to connect 13/10mm tubing with a 1/4“ thread.
Part Number62364

Questions about this item

Will the G1/4 thread on the 17077 fit standard water-cooling blocks and radiators?

Yes, the G1/4 thread is the common size used on most CPU blocks, GPU blocks and radiators in custom loops.

How do I install the 13/10mm compression fitting without leaking, and what step is often missed?

Slide the compression ring onto the tube first, push the tube fully over the barb until it seats against the body, then tighten the ring by hand plus a quarter turn with a spanner — forgetting the ring is the usual cause of leaks.

When should I replace the 13/10mm compression fitting or its sealing ring?

Inspect the O-ring each time you drain the loop; replace it if it shows cracks, flattening or loss of elasticity, and replace the fitting if the chrome finish peels or the threads strip.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.