We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Allied Telesis PoE+ to SFP media converter unit

Allied Telesis

Allied Telesis PoE+ to SFP media converter cpu accessory

SKU CH-XDW4-X3BBB GTIN 767035224374

Converts PoE+ to SFP for remote devices up to 2000 metres with 30W power delivery

  • Powers remote PoE+ devices up to 30W without local power
  • Extends network reach beyond 100m using SFP fiber optics
  • Supports 10/100/1000T copper and 100M/1000M SFP speeds
  • Auto power-cycles remote device when fiber link drops
  • New Allied Telesis media converter model 767035224374

PoE+ to SFP media converter

The Allied Telesis 767035224374 connects a powered device to a fibre uplink through a single compact unit. It accepts a 10/100/1000T copper link and an SFP module running at 100MB or 1000MB. The copper port delivers up to 30W to IEEE 802.3at equipment such as IP phones or cameras. Remote power cycling activates when the fibre link drops.

Distance limits on copper and fibre

Copper reach is capped at 100m, so the converter must sit within that range of the powered device. Fibre distance depends on the SFP module chosen: 100MB optics reach up to 2000m, while 1000MB optics reach up to 550m. The SFP slot supports multimode, single-mode and BiDi optics. No fixed fibre connector is built into this model.

Checks before ordering

Confirm the remote device requires PoE+ and draws no more than 30W. Verify the SFP module matches the fibre type and distance needed for the link. Ensure the copper run from converter to device stays within 100m. The unit needs a suitable power source for its own operation and for the PoE+ budget it supplies.

Highlights

  • Powers remote PoE+ devices up to 30W without local power
  • Extends network reach beyond 100m using SFP fiber optics
  • Supports 10/100/1000T copper and 100M/1000M SFP speeds
  • Auto power-cycles remote device when fiber link drops
  • New Allied Telesis media converter model 767035224374

Specifications

No published specifications for this item yet.

Questions about this item

Which Allied Telesis media converter model should I choose for PoE+ over SFP?

The Allied Telesis 767035224374 is a PoE+ to SFP switching media converter that supports both 100MB and 1000MB SFP optics alongside a 10/100/1000T twisted-pair port for power and data.

What does the 30W PoE+ rating mean when the converter is installed?

The twisted-pair port delivers up to 30W of power to IEEE 802.3at compliant devices such as IP phones, cameras or wireless access points, removing the need for a local power supply at the remote end.

How far can the SFP link run at 1000MB and 100MB speeds?

Using SFP optics the link reaches up to 550m at 1000MB and up to 2000m at 100MB; fixed fibre variants offer SC or LC connectors with the same distance limits.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.