ALITOVE J200-12005000D 12V 5A 60W Power Adapter
Converts 100-240V AC to 12V DC at 5A with a 5.5x2.5mm barrel jack and overload protection for LED strips, 3D printers and CCTV cameras
- Type12 V
- Color12V 5A Power Supply
- Cable Length90 centimeters
- Specifications60 watts, 12 volts_of_direct_current, 5 amps, 110 volts_of_a
- Connector ABarrel Connector
- Connector BBarrel Connector
- Delivers stable 12 V 5 A power for sensitive electronics
- Worldwide 100-240 V AC input suits travel or fixed installs
- Four protection circuits guard against overload, over-voltage, heat and shorts
- Includes 5.5×2.5 mm barrel jack plus free female connector for solderless wiring
- Compact 90 cm cable keeps desk or rack layouts tidy
ALITOVE 12V 5A 60W Power Adapter
The ALITOVE J200-12005000D is a 12 volt direct current power supply delivering up to 5 amps and 60 watts. It accepts AC input from 100 to 240 volts at 50 or 60 hertz and terminates in a 5.5 by 2.5 millimetre barrel connector that also fits 5.5 by 2.1 millimetre jacks. The unit includes automatic overload, over-voltage, thermal and short-circuit protection plus a free female DC connector for solderless wiring.
Indoor LED and low-voltage device users
This adapter suits anyone powering 12 volt LED strips such as 5050 or 3528 types, 3D printers, ham radio transceivers, CCTV cameras, car subwoofer amplifiers, audio amplifiers, wireless routers, ADSL modems or hubs that draw no more than 5 amps. It is not for devices requiring 5, 9, 19, 20, 24 or 36 volts, nor for equipment needing more than 5 amps at 12 volts, and it is rated for indoor use only.
Plug-in installation with polarity check
Installation is straightforward: connect the barrel plug to the device, attach the supplied female DC connector to bare wires if needed, and plug the IEC lead into a mains socket. The 90 centimetre output cable reaches most bench or enclosure positions. The most common issue is reversing polarity or using a device with a different voltage or higher current draw, which triggers the protection circuits and shuts the unit down.
Highlights
- Delivers stable 12 V 5 A power for sensitive electronics
- Worldwide 100-240 V AC input suits travel or fixed installs
- Four protection circuits guard against overload, over-voltage, heat and shorts
- Includes 5.5×2.5 mm barrel jack plus free female connector for solderless wiring
- Compact 90 cm cable keeps desk or rack layouts tidy
Specifications
| Brand | ALITOVE |
|---|---|
| Series | J200-12005000D |
| Model | J200-12005000D |
| Part Number | J200-12005000D |
| Type | 12 V |
| Color | 12V 5A Power Supply |
| Cable Length | 90 centimeters |
| Specifications | 60 watts, 12 volts_of_direct_current, 5 amps, 110 volts_of_alternating_current, Barrel Connector, type_b_3pin_na, 0, LED Strips, 3D Printer, ham radio transceiver, CCTV cameras,car subwoofer amp, audio amplifier, wireless router, ADSL Cats, HUB, J200-12005000D |
| Connector A | Barrel Connector |
| Connector B | Barrel Connector |
| Cable Jakcet Type | Other |
| Connector Style | Barrel Connector |
| Apple Compatible | Barrel Connector |
| Features | LED Strips, 3D Printer, ham radio transceiver, CCTV cameras,car subwoofer amp, audio amplifier, wireless router, ADSL Cats, HUB, Barrel Connector, DC, 0, 60 watts |
| Dimensions | 4.191 cm x 11.4046 cm x 18.2118 cm |
| Weight | 150 grams |
| Package Quantity | 1 |
| Package Contents | 1 unit |
| Disclaimer | unknown |
Questions about this item
What input voltage range must my mains supply provide for this ALITOVE J200-12005000D adapter to operate?
The adapter accepts AC 100 V to 240 V at 50/60 Hz, so it works on standard household mains worldwide without a separate voltage selector.
Will the 5.5 mm × 2.5 mm barrel plug on this 12 V 5 A unit fit the 5.5 mm × 2.1 mm jack on my older LED strip or router?
Yes, the manufacturer states the output jack is compatible with both 5.5 mm × 2.5 mm and 5.5 mm × 2.1 mm connectors, so older devices with the smaller centre pin will still connect securely.
How can I verify the adapter is delivering a steady 12 V after I plug it in?
The unit features no voltage fluctuation at power-on, during operation or at power-off, so a multimeter reading a stable 12 V DC at the barrel output confirms it is working as intended.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



