We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal industrial fan on a yoke stand with three blades and a cord

Airmaster Fan Company

Airmaster Fan Company 78972 18 in Non-Oscillating Fan Accessory

SKU CH-D1CM-PW86M

An 18-inch non-oscillating fan accessory delivering up to 2966 CFM on high speed with three settings and a 69 dBA maximum sound level

  • weight21
  • typeClosed Base
  • materialHAWA
  • 18-inch blade delivers up to 2966 CFM airflow for large-space cooling
  • Three-speed shaded-pole motor runs at 1600 RPM with 1/8 HP output
  • Direct-drive design eliminates belt maintenance and reduces mechanical wear
  • Yoke mounting allows flexible wall or ceiling positioning in industrial settings
  • Operates up to 105 °F ambient with 63-69 dBA sound levels across speeds

Industrial Air Circulation

The Airmaster Fan Company 78972 is an 18 inch light-duty industrial fan built for stationary, non-oscillating airflow in workshops, warehouses or garages. It delivers three-speed operation with a shaded-pole motor rated at 1/8 horsepower running on 115V AC single-phase power. The direct-drive design produces up to 2966 CFM on high speed for general ventilation needs.

Electrical And Mounting Check

Verify that the installation site provides a 115V AC, 60 Hz circuit capable of supplying 1.65 operating amps. The unit includes an 8 foot power cord and uses a yoke mounting style, so confirm the mounting structure can support the 21 weight and the overall dimensions of 22 inches high, 23 inches wide and 9 inches deep. Ensure the ambient temperature does not exceed 105 degrees Fahrenheit during operation.

Sound And Thermal Profile

Sound output measures 69 dBA at high speed, 66 dBA at medium and 63 dBA at low speed, allowing quieter operation when full airflow is not required. The motor runs at 1600 RPM and is rated for a maximum ambient temperature of 105 degrees Fahrenheit, so the fan maintains performance in warm industrial environments without additional cooling provisions.

Highlights

  • 18-inch blade delivers up to 2966 CFM airflow for large-space cooling
  • Three-speed shaded-pole motor runs at 1600 RPM with 1/8 HP output
  • Direct-drive design eliminates belt maintenance and reduces mechanical wear
  • Yoke mounting allows flexible wall or ceiling positioning in industrial settings
  • Operates up to 105 °F ambient with 63-69 dBA sound levels across speeds

Specifications

BrandAIRMASTER FAN
weight21
typeClosed Base
materialHAWA

Questions about this item

What comes with the 18 in fan and what must I buy separately?

The 78972 unit includes the motor, blade and yoke mount with an 8 ft cord. No speed controller or additional mounting hardware is supplied.

Should I choose the 1/8 hp 115 V model or a different capacity for a small workshop?

The 1/8 hp motor delivers 2966 CFM on high and 2013 CFM on low at 1600 RPM, suitable for light-duty spot cooling in areas up to the 105 °F ambient limit.

What does the 69 dBA high-speed rating mean once the fan is running on my bench?

At the highest of the three speeds the unit produces 69 dBA, dropping to 66 dBA on medium and 63 dBA on low, so conversation nearby remains possible.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.