AINOPE USB 3.0 A to A Male Cable 6.6ft 5Gbps Grey
A 6.6 ft USB 3.0 male-to-male cable delivering 5 Gbps data transfer between drives, hubs, KVMs and peripherals
- TypeUSB
- Connector TypeUsb to Usb
- ColorGrey
- Cable Length6.6 ft
- Length6.6 ft
- Connector Number4
- 6 ft cable reaches distant devices without stressing ports
- 5 Gbps transfer rate moves large files ten times faster than USB 2.0
- 9-core tinned copper with triple shielding blocks interference for stable signals
- 24 K gold-plated connectors resist oxidation for lasting conductivity
- Braided nylon jacket tested to 400 000 bends repels water and prevents tangles
6.6 ft USB 3.0 A-to-A cable for peripheral links
This male-to-male Type-A cable connects USB 3.0 hard drives, laptop cooling pads, hubs, KVM switches and printers at up to 5 Gbps. The 6.6 ft length lets you route the cord cleanly across a desk or reach a floor-mounted KVM without stressing ports. It is backward compatible with USB 2.0 and 1.1 hosts. The grey braided jacket resists tangles and water splashes.
Gold-plated connectors
24K gold plating on every contact prevents oxidation and maintains stable conductivity over years of plugging and unplugging. Inside, a 9-core tinned copper matrix is wrapped in foil plus braid shielding to block EMI and RFI interference during large file transfers. The hydrophobic nylon braid repels spilled drinks and resists pilling, so the cable stays flexible and clean on busy desks.
Reinforced strain relief survives 400,000 bend
A unique SR anti-break design at each connector end absorbs repeated flexing, preventing the internal conductors from snapping near the plug. Simply plug both Type-A ends into the host and peripheral; no drivers or software are required. The cable does not support direct PC-to-PC data transfer, video output, or charging external power banks and printers. Verify that both devices use USB-A ports before purchase.
Highlights
- 6 ft cable reaches distant devices without stressing ports
- 5 Gbps transfer rate moves large files ten times faster than USB 2.0
- 9-core tinned copper with triple shielding blocks interference for stable signals
- 24 K gold-plated connectors resist oxidation for lasting conductivity
- Braided nylon jacket tested to 400 000 bends repels water and prevents tangles
Specifications
| Brand | AINOPE |
|---|---|
| Model | 1 |
| Type | USB |
| Connector Type | Usb to Usb |
| Color | Grey |
| Cable Length | 6.6 ft |
| Length | 6.6 ft |
| Connector Number | 4 |
| Connector Detail | Usb to Usb |
| Terminal Gender | Male-to-Male |
| Speed | 5 gigabits_per_second |
| Construction | gold |
Questions about this item
Will the gold-plated connectors on this USB 3.0 A-to-A cable wear out or need replacement?
The 24K gold-plated connectors resist oxidation and maintain stable conductivity for many years, so they do not require routine replacement.
What limits the 5 Gbps transfer speed during sustained large-file copies?
The cable supports USB 3.0 at 5 Gbps with triple shielding and 9-core tinned copper, so the practical limit is the host controller or drive speed, not the cable itself.
Does the braided nylon jacket and internal shielding keep the cable cool and quiet during all-day use?
The cable is passive with no active electronics, so it generates no noise or measurable heat; the hydrophobic braided jacket and foil-plus-braid shielding handle EMI without thermal load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
