We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black RGB controller box with remote, 10 six-pin fan ports and two four-pin light-bar connectors

aibileec

aibileec RGB Controller 10×6Pin 2×4Pin 12V 5A internal power cable

SKU CH-PXJ8-TNA7M

Controls up to 10 RGB fans and 2 light bars with 368 colour modes, 3 music modes and motherboard sync via 433.92 MHz remote

  • ColorBlack
  • Controls 10 fans and 2 light bars via 6-pin and 4-pin ports
  • 368 colour modes plus 3 music-reactive presets
  • RF remote operates at 433.92 MHz frequency
  • Adjustable fan speed with 26.4 dBA low-noise rating
  • 12 V 0.28 A power input with marked polarity protection

RGB Controller for 10 Fans and 2 Light Bars

This internal power cable kit centres on a 12 V controller that drives up to ten 6-pin RGB fans and two 4-pin light bars. It ships with an RF remote operating at 433.92 MHz and offers 368 pre-programmed colour modes plus three music-reactive presets. Motherboard RGB synchronisation is supported for unified lighting across the build.

Builders who want centralised fan and light control

The unit suits enthusiasts who prefer a single hub to manage fan speed, brightness and colour without software. It is not suited for systems that rely exclusively on 5 V addressable headers or for users who need per-LED addressable effects, because the controller only drives standard 12 V RGB devices.

Ten fan channels and two light-bar channels

Each fan draws 0.28 A at 12 V, so the 5 A controller rating provides comfortable headroom for the full complement of ten fans and two light bars. Acoustic output is rated at 26.4 dBA, keeping noise low under typical loads. Exceeding the 5 A limit or connecting the power cable to the wrong inlet risks damaging the LED beads.

Highlights

  • Controls 10 fans and 2 light bars via 6-pin and 4-pin ports
  • 368 colour modes plus 3 music-reactive presets
  • RF remote operates at 433.92 MHz frequency
  • Adjustable fan speed with 26.4 dBA low-noise rating
  • 12 V 0.28 A power input with marked polarity protection

Specifications

ColorBlack

Questions about this item

What power supply connection does the controller require to run ten fans and two light bars?

The controller needs a 12 V supply capable of 5 A, plugged only into the marked power inlet on the panel.

Will the controller work with my existing 12 V fans that draw 0.28 A each?

Yes, each 12 V fan rated at 0.28 A can be connected to the ten 6‑pin fan ports.

How can I confirm the controller is operating correctly after installation?

Use the remote to cycle through the 368 colour modes and three music modes; the fans should change colour, speed and brightness accordingly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.