Peerless Industrial Group
Peerless Industrial Group Tire Chains Single Bus & RV V-Bar PK2 QG2821
$67.99
0.00080905BTC
In stock
AGS Sil-Glyde 4 oz Silicone Brake Lubricant Tube
Silicone brake lubricant protects the entire assembly from squeal, rust and moisture while withstanding temperatures over 425°F (218°C)
- Height1.37 L x 2.25 W x 6 H inches
- Width1.37 L x 2.25 W x 6 H inches
- Length1.37 L x 2.25 W x 6 H inches
- Weight0.118 kilograms
- TypeGrease
- Eliminates disc brake squeal by dampening vibrations between pads and rotors
- Protects entire brake assembly with silicone formula safe for rubber and plastic parts
- Withstands temperatures over 425 °F (218 °C) for reliable performance under extreme heat
- Moisture-proof formula prevents rust and corrosion on caliper pins and slides
- Trusted by mechanics and DIYers since 1931 for quiet, long-lasting brake service
Complete Brake Assembly Lubricant
AGS Sil-Glyde is a silicone-based brake lubricant supplied in a 4 oz tube. It is formulated for the entire brake assembly including caliper pins, slides, and pad backing plates. The product suits professional mechanics and DIY enthusiasts performing brake service or replacement.
Temperature and Material Limits
The lubricant withstands temperatures over 425°F (218°C) and remains moisture-proof. It is compatible with plastic and rubber components such as EPDM and nitrile seals. Petroleum-based alternatives can degrade these materials, but this silicone formula does not.
Silicone Formula Eliminates Squeal
The premium silicone formula dampens harmonic vibrations between pads and rotors to stop disc brake squeal. It also protects metal parts against rust and corrosion while easing disassembly during future maintenance.
Highlights
- Eliminates disc brake squeal by dampening vibrations between pads and rotors
- Protects entire brake assembly with silicone formula safe for rubber and plastic parts
- Withstands temperatures over 425 °F (218 °C) for reliable performance under extreme heat
- Moisture-proof formula prevents rust and corrosion on caliper pins and slides
- Trusted by mechanics and DIYers since 1931 for quiet, long-lasting brake service
Specifications
| Brand | AGS |
|---|---|
| Height | 1.37 L x 2.25 W x 6 H inches |
| Width | 1.37 L x 2.25 W x 6 H inches |
| Length | 1.37 L x 2.25 W x 6 H inches |
| Weight | 0.118 kilograms |
| Type | Grease |
Questions about this item
Which size tube should I pick for a full brake job?
The 4 oz tube supplies enough silicone grease to coat caliper pins, slides, pad backing plates and rubber seals on a typical four-wheel disc brake service.
What does the 425 °F rating mean when the brakes are hot?
The lubricant remains stable past 425 °F (218 °C), so it will not melt, run off or carbonise during repeated hard stops.
How does the silicone formula interact with rubber and plastic parts?
It is compatible with EPDM and nitrile rubber plus plastic components, protecting seals and boots without swelling or degradation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
